Composite tread and bearing unit, sized for direct replacement of conventional cam followers, includes a threaded stainless steel-mounting stud. But unlike conventional cam followers, there are no internal rolling elements and no need for lubrication. The internal design eliminates the possibility of product or process contamination from lost lubricant, and with a non-metallic rolling surface, operating noise is reduced.
Osborn International, 5401 Hamilton Ave., Cleveland, OH 44114-3997; FAX (216) 361-1606; www.osborn.com.
For Information, circle 595
Ring flange protectors
The snug fitting SS Series sprayout safety rings prevent sprayouts by creating a protective zone between chemical flowing through piping systems and the outside environment. Precision formed of flexible polyethylene, the new rings slip easily over flange connections and eliminate the need for cumbersome sprayout bag systems. Niagara Plastics Co., 7090 Edinboro Rd., Erie, PA 16509; FAX (800) 358-4391; www.niagaraplastics.com.
For Information, circle 596
These mounts are designed for isolating shock and vibration in a wide range of equipment, including industrial machinery, air compressors, semiconductor equipment, electronics manufacturing, HVAC equipment, generators, motors, conveyors, and optical equipment. The series includes mounts with natural frequencies varying from 3-35 Hz and load ranges of 1.8 to 30,000 lb. The mounts are manufactured from corrosion resistant materials, as well as resilient elements or natural rubber, Neoprene, and felt.
Barry Controls, 40 Guest St., Brighton, MA 02135; FAX 617-782-8140; www.barrymounts.com.
For Information, circle 597
The MS-Touch membrane switch laminating adhesives include 2 and 5-mil versions available as double-linered sheets of single linered rollstock. The spacer adhesive materials are offered in 3, 5, 7, 9, and 11-mil versions. These products are designed to exhibit peak performance under the most rigorous environments, (with shear performance up to 400F), and withstand a variety of chemical environments such as moisture, solvents, and long-term UV exposure.
Avery Dennison - Specialty Tape, 250 Chester St., Painesville, OH 44077; FAX (440) 358-3295; www.averydennison.com.
For Information, circle 598
The clip-on seals were designed to easily clip on to exposed edges without adhesives, screws, or rivets. They have a wide variety of applications, including electrical enclosures, window seals, weather stripping, and truck beds. The dual durometer clip-on seals are available in standard profiles and can be ordered in minimal quantities. Custom parts can be produced for specific applications and sealing requirements.
Lauren Mfg., 2228 Reiser Ave. SE, New Philadelphia, OH 44663; FAX 330 339-1515; www.lauren.com.
For Information, circle 599
These vibration-resistant connectors with built-in strain relief in the plug housing are designed for measurement, control, and monitoring systems. The CA line of connectors features a compact design, and is particularly suitable for confined locations. A 907 version is available so that an optimum cable direction can be achieved. They are designed to handle voltages up to 400V and line current up to 16A.
Hirschmann Inc., 30 Hook Mountain Rd., Pine Brook, NJ 07058; FAX (973) 830-1470; www.hirschmann-usa.com.
For Information, circle 600