Design News is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Feb 5 - Day 2 - Bootloader Hardware Design

The second session will describe the hardware design that will be used to implement the physical components of the Microchip PIC18F47J13 Bootloader. The hardware will consist of a PIC18F47J13 that is supported by an FTDI FT232RL USB-to-UART Bridge IC and a Microchip MCP1703 3.3-volt LDO voltage regulator. A buffered microSD card carrier card and an NHD-02C16CZ 3.3-volt LCD are also part of the Bootloader hardware complement.
Webinar Information
Start Date: Feb 05, 2013 - 07:00 PM UTC

The second session will describe the hardware design that will be used to implement the physical components of the Microchip PIC18F47J13 Bootloader. The hardware will consist of a PIC18F47J13 that is supported by an FTDI FT232RL USB-to-UART Bridge IC and a Microchip MCP1703 3.3-volt LDO voltage regulator. A buffered microSD card carrier card and an NHD-02C16CZ 3.3-volt LCD are also part of the Bootloader hardware complement.