High Temperature Resistant VICTREX® PEEKTM Polymer Replaces Stainless Steel Valves and Housings in Beverage Bottling Machines

DN Staff

April 8, 2010

1 Min Read
High Temperature Resistant VICTREX® PEEKTM Polymer Replaces Stainless Steel Valves and Housings in Beverage Bottling

MATERIALS: Solidur selected VICTREX® PEEK polymer, manufactured by Victrex Polymer Solutions, a division of Victrex plc and leading provider of high performance polyaryletherketones, to replace stainless steel filling valves in beverage bottling machines and the housings responsible for placing the threaded cap on each bottle. VICTREX PEEK polymer was chosen for its ability to withstand the high temperatures of the sterilization process and for its abrasion resistance.

The stainless steel material previously used in the bottling machines suffered excessive wearing due to friction between the valve and the valve counterpart. Solidur replaced the metal and reduced weight with VICTREX PEEK components which increased the system lifetime. The low coefficient of thermal expansion and the dimensional stability of VICTREX PEEK polymer also solved the problem that lower performance polymers could not.

As an additional benefit from switching to VICTREX PEEK polymer housings, Solidur was able to reduce the cutting machine noise that was created by the grinding of steel against steel and of steel against glass. Dimensional stability was also critical because of the very tight tolerances of the stainless steel. VICTREX PEEK polymer provides the high mechanical strength and chemical and wear resistance needed for the components.

In addition to excellent thermal resistance and dimensional stability, VICTREX PEEK polymer is non-toxic and certified for food contact by the FDA. The switch to VICTREX PEEK polymer increased the equipment lifetime performance, reduced the production downtime and increased productivity rates.

mat-victrex-forweb.gif

-Edited by Kelsey Anderson

Sign up for the Design News Daily newsletter.

You May Also Like