Selecting Connectors for Mobile Medical Devices
December 10, 2012
Like many types of electronics, medical diagnostic devices are appearing in ever-smaller form factors, and are increasingly relying on wireless communications. From sophisticated instruments for the medical community, to personal health monitors for consumers, these devices are becoming a lot more like our mobile phones.
That's good news if you design medical electronics. You have an opportunity to avoid costly design mistakes, and get products to market faster by embracing technologies that have a proven track record in mobile phone applications.
Fine-pitch connectors are one such technology.
You might believe that all fine-pitch, low-profile connectors are created equal, but they're not. Even if they have similar datasheet specs related to package size and pitch, these connectors differ in subtle ways that can affect their reliability during the assembly process and in use.
Here are the key technical factors to consider when looking for a reliable connector for use in mobile or other handheld medical devices:
Tolerates mechanical forces. The board-to-board, and board-to-FPC (flexible printed circuit) connections within mobile medical devices have to withstand substantial forces -- from insertion forces during assembly, to shock and vibration forces in use. A robust contact geometry is the first line of defense against these forces.
Contains the solder. The low-profile connectors used in mobile devices are susceptible to damage from solder rise. The best connectors will provide an integrated nickel barrier to keep the solder in its place.
Resists corrosion. Corrosive gases generated during the assembly process can damage connectors, ultimately shortening their life. Look for connectors with an anti-corrosion surface treatment.
Stays in alignment. Co-planarity of the connector pins may not be the most obvious product selection factor, but it directly affects insertion force and the connector's ability to withstand repeated insertions. Look for connectors with the best co-planarity specs.
— Jane N. Awittor is a product engineer for Panasonic Electric Works Corporation of America. She's an electrical engineer with five years of experience specializing in passive IR (PIR), IR arrays, and pressure sensors.
Related posts:
About the Author
You May Also Like