Design News is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.
HomeCEC ArchiveCEC Semester Seven 2015Designing Low Power Systems using Battery and Energy Harvesting Energy Sources

Designing Low Power Systems using Battery and Energy Harvesting Energy Sources

Digi-Key Design News Continuing Education Center
Continuing Education Center
The CEC will get you up to speed quickly on a host of technologies you've been meaning to study via a series of 45-minute online lessons taught by our faculty of expert tutors.
Highlights
May 5 - Day 2: Battery Power for MCUs and FPGAs
Batteries are used in a wide range of MCU- and FPGA-based applications. Understanding the key power requirements and how to use power efficiently provides the basis for all battery-operated applications. This knowledge is power.
May 4 - Day 1: An Introduction to Low-Power Systems
This class will lay the groundwork for mastering the key concepts that will come up during the rest of the course. The key requirements for low-power systems - both when powered from batteries or from energy harvesting systems - will be described.