In electronics assembly, new film star for LCD makersIn electronics assembly, new film star for LCD makers
February 12, 2004
Pittsfield, MA-The coated diffuser films used to mange the light in liquid crystal displays can give manufacturers a real headache. Usually made from polyester film coated with micron-sized optical beads, these films can lose bits of coating and develop optical defects as they make their way through the LCD manufacturing process, driving down yields substantially. GE Advanced Materials has come up with a new line of polycarbonate diffuser films that can eliminate these coating-related failures.
Called Illuminex and based on Lexan optical quality polycarbonate, these monolithic diffuser films have no coating at all. "There's nothing to flake off," says Todd Hoff, industry manager for displays. Instead of the coating, Illuminex films get their optical properties from two proprietary technologies developed by GE scientists. The first uses additives to incorporate diffusion properties into the resin itself. The second involves a surface modification to the films as part of the melt-calendaring process. According to Hoff, this texturing process creates a "random surface profile" that helps distribute light evenly, one of the primary functions of diffuser films
In terms of optical performance-which LCD makers measure in terms of "hiding power, luminescence, and viewing angle-the Illuminex films "meet or exceed the performance of coated products," Hoff says. And the films may offer another kind of performance edge as well. With an HDT of about 135 C, versus 80-85 C for many polyester products, the new Illuminex films promise to do a better job resisting the permanent waviness that can develop when displays go into high-heat and -humidity environments.
But it's in the yield department that these films really start to shine. A handful of display makers have quietly adopted GE's new technology over the past year and generally seen 10% yield improvements, Hoff reports. "That all comes down to the elimination of coating failures from handling," he says. There are other sources of coating failure too, such as CTE mismatch between the coating and film substrate. Overall yield losses from diffuser films can top 20% in some operations.
GE has developed several grades of Illuminex films for use as bottom and top diffusers in a wide variety of consumer electronics and automotive displays. Current products come in thicknesses of 127 and 203 microns for products ranging in size from PDAs up to large television sets. Right now, there's no Illuminex product for the smallest displays, such as those used in some cell phones, but Hoff says these are in the works.
For more information, go to www.geadvancedmaterials.com.
About the Author(s)
You May Also Like
Partnership Yields the Ducati Diavel for BentleyDec 08, 2023
Mercedes-AMG GT Aerodynamics: Form Follows PerformanceDec 07, 2023
Developing Raspberry Pi 5 Apps Using EclipseDec 08, 2023
Magna Supercharges ADAS with 5GDec 07, 2023