Product News 28088

Bearing

The Nyliner^TM polymer bearing delivers zero clearance with low friction and is a self-lubricating, constant-preload linear/rotary bearing for moderate-load applications including instruments, computer hardware, and medical. Zero clearance is maintained by the pressure exerted by the tips of preloaded curved pads upon the shaft. This constant and equal pressure continues over the life of the bearing. The zero-clearance bearing is produced in different composites to meet the thermal, chemical, and load requirements of specific applications.
Thomson Industries Inc., 2 Channel Dr., Port Washington, NY 11050, FAX (516) 883-9039.

Diodes

PIN and Schottky-barrier diodes are available in multidiode configurations in the 4.2 mm² six-lead SOT-363 package. This packaging, with the same outside dimensions as the SOT-323 three-lead package, offers the designer several choices in using high-performance diodes in compact pc-board layouts. Applications include digital cellular phones such as GSM, analog cellular phones, and DECT handsets. Applications also include compact, cost-restrained ones such as TV distribution including DBS and cable, computer clock termination, and PCI bus.
Hewlett-Packard Co., Box 58059, Santa Clara, CA 95052.

Instruments

Models KNM-DCV41, -DCV42, -TC41, and -TC42 are part of the SmartLink^TM Series of compact-network and remote-measurement devices. In addition to their front-to-back isolation, these instruments provide 800V channel-to-channel isolation and ±400V inputs on all channels, with 120 dB common-mode rejection at dc, 50 Hz, or 60 Hz. The design provides current isolation that virtually eliminates ground loops in complex measurement configurations. Applications include demanding measurements such as dc volt readings, four-wire resistance tests, and thermocouple temperature measurements.
Keithley Instruments Inc., 28775 Aurora Rd., Cleveland, OH 44139, FAX (216) 248-6168.

Speed reducer

The SHF-2UH zero-backlash, high-accuracy harmonic-drive speed reducer features a large hollow shaft and a compact design with an integral cross-roller output bearing and a large hollow shaft through the gear. The unit design is both axially shorter and lower in weight and uses a patented "S" tooth profile. Gear reduction ratios of 50:1 through 160:1 are available in a single stage.
HD Systems Inc., 89 Cabot Ct., Hauppauge, NY 11788, FAX (516) 231-6803.

Sensors

Adjustable-field photoelectric sensors allow users to detect objects within a defined sensing field, while ignoring reflective objects located beyond the sensing-field cutoff point. The sensors allow users to define a unique cutoff point for each application, and use a dual-element photodiode and hybrid geometry to achieve reliable adjustment and sensor performance in critical applications. The 10 to 30V dc-powered sensors are available in two models with adjustable sensing cutoff points of either 50 to 150 mm or 125 to 400 mm. The sensing-field cutoff distance is adjusted using the unit's 12-turn slotted-brass potentiometer, clutched at both ends to prevent breakage.
Banner Engineering Corp., Box 9414, Minneapolis, MN 53440, FAX (612) 544-3213.

Springs

The INTERCONNECTRIC® line of miniature gold-plated bellows contact springs are for dynamic interconnections. These contacts can be used individually or as pairs in applications where reliability and flexibility are a requirement. These contacts come with either a convex-conical or concave-conical tip, which when paired will allow them to self-align at interconnection. Diameters range from 0.037 to 0.125 inches O.D. The contacts minimize shock and vibration in dynamic applications.
Servomotor Corp., 501 Little Falls Rd., Cedar Grove, NJ 07009, FAX (973) 785-0756.

Gate arrays

The MX family of field-programmable gate arrays (FPGAs) feature ASIC-like performance and is composed of seven devices from 2,000 to 52,000 logic gates. The MX family is based on MultiPlex I/O architecture and provides designers with a choice of pure 5V, pure 3.3V, or 5/3.3 mixed-voltage operation. The family supports true 5V output swings, resulting in better noise margin on the board. The MultiPlex I/O also features selectable 5V PCI-compliant I/Os, providing designers with high-output current for PCI applications or low-power operation where PCI is not required.
Actel Corp., 955 E. Arques Ave., Sunnyvale, CA 94086.

Nitrocarburizing process

Salt bath nitrocarburizing (SBN^TM) processes modify the surface of ferrous parts. Results include improved metal hardness, wear properties, corrosion resistance, and fatigue strength. Surface lubricity and cosmetic appeal are also enhanced. Applications include high-speed cutting tools, thin-walled stampings, dies for die casting, cast iron (gray and modular) parts, and stainless-steel components used in sliding and rotating systems. Treatment with the SBN process produces two distinct microstructural zones.
Kolene Corp., 12890 Westwood Ave., Detroit, MI 48223, FAX (313) 273-5207.

Sensors

SM5712 and SM5752 silicon pressure sensors combine a precision pressure sensor with a signal-amplification ASIC in a single compact dual-in-line package. Calibration and compensation are done before manufacturing. The SM5712 is intended for measurement in the standard 0-5 psi and 0-100 psi ranges. The SM5752 uses a specially designed low-pressure sensing element to measure pressures in a range as low as 0-0.15 psi full-scale.
Exair Corp., Silicon Microstructures Div., 48720 Kato Rd., Fremont, CA 94538, FAX (510) 668-7017.

Bracket

The optical fiber expandable bracket (OFEB) accommodates up to six 3-mm fiber-optic cables housed in small grooves. Each groove holds two 3-mm cables that are snapped in. The components snap- fit into each other to allow for an unlimited number of fiber cables. The material is flame-retardant nylon which is UL 94 V-O rated.
Richco Inc., 5825 N. Tripp Ave., Chicago, IL 60646, FAX (773) 539-6770.

Cylinders

Replacement barrel cylinders increase current-carrying capability for more uniform finishing and shorter cycle times. The cylinders are formed from a single sheet of stress-relieved polypropylene. This one-piece cylindrical design eliminates many of the joints, or stress points, common to hexagonal barrels. The cylindrical barrels also provide more usable volume and greater open area. The design features a closure system for cylinders that eliminates straps and clamps, and a single-point set-down system which allows the barrel to drop into the saddle without drive adjustment.
Jessup Engineering Inc., 2745 Bond St., Rochester Hills, MI 48309.

Monitor

The 19sd95 19-inch monitor is housed in a shallow, 18.1-inch-deep cabinet and fits onto small work surfaces. The flat-square screen in this compact cabinet minimizes distortion at screen edges and corners and delivers accurate full-screen display. The monitor is targeted for visual computing and combines attributes of Invar shadow-mask technology with an electron gun design. The 19sd95 monitor delivers screen performance at 1,280 × 1,024 resolution with a high 88-Hz refresh rate, and supports up to 1,600 × 1,200 flicker-free resolution at 76- Hz refresh rate.
Intergraph Computer Systems, CR1105, Huntsville, AL 35894.

Seal profile

Zurcon® Wynseal is a seal profile that consists of a polyurethane seal ring with an O-ring as the energizing element. The design of the seal-edge profile features two external seal edges acting as the primary seal for pressures from both sides, preventing build-up of hydrodynamic pressure. A sealing effect along the plane surface activates the energizing O-ring. Wynseal is targeted for standardization of cylinder construction if efficient low-cost seal elements are needed.
Busak+Shamban, Box 176, Fort Wayne, IN 46801, FAX (219) 422-6420.

Oil

Aerokroil penetrating oil is harmless to metal and the environment, creeps into millionth-inch spaces, loosens frozen metal parts, and dissolves grease and carbon. The oil contains no HCFCs, 111 trichlorethane, methylene chloride, freon, or any other Class I or Class II ozone-depleting compound. Aerokroil has been approved for use in nuclear plants as a Category I material and has USDA approval.
Kano Laboratories Inc., 1000 S. Thompson Lane, Nashville, TN 37211, FAX (615) 833-5790.

Power conditioners

MPC portable medical power conditioners provide protection for medical systems from surges, sags, spikes, brownouts, harmonics, SCR notches, and EMI/RFI noise. The MPC Series offers low-leakage current requirements of UL 544 for equipment located in patient areas, and provides identifiable output receptacles to indicate they are safe for hospital-grade use. The portables are targeted for use in imaging systems, monitors, medical carts, and diagnostic and patient-care equipment.
Sola/Hevi-Duty, Box 268, Goldsboro, NC 27533.

Relay packages

The PVT422P Series of low-profile, surface-mount packages is part of the company's specialized telecom and general-purpose microelectronic relays (MERs) line and is for the portables market. Applications include Type II PCMCIA fax/modem and data-acquisition cards. The series offers a maximum load voltage of ±400V (dc or ac peak) and a maximum load current of 120 mA per channel at an R_DD(ON) of 35{OMEGA} maximum. The PVT422P does not derate the load current when both channels are on at the same time and requires only 2 mA of input LED current to actuate, which makes it TTL- and CMOS-compatible.
International Rectifier, 233 Kansas St., El Segundo, CA 90245.

Pumps

The DDL Series of double-diaphragm oilless linear pumps includes 230V models targeted for use in Europe, as well as domestically where higher voltages are required. The series also includes lower-voltage ac models and a 12V dc unit. The series features free-air flow as low as 0.39 cfm or as high as 8.6 cfm with pressure to 10.5 psi and vacuum to 12.1 inches Hg.
Gast Mfg. Corp., Box 97, Benton Harbor, MI 49023, FAX (800) 771-8349.

Cylinders

Twin Rod air cylinders have less than 1/3 degree of rotation, allowing precise rod alignment and virtually eliminating rod-end play for guided linear motion. Cylinders have a rectangular body that simplifies mounting, saves space in multiple applications, and helps achieve precise angles. Twin Rod cylinders are available in single- and double-acting models, with strokes from 1/2 to 4 inches all having built-in fine stroke adjustment, in six bore sizes from 1/4 to 11/4 inch. Integral magnets permit mounting sensor switches on three sides.
Humphrey Products Co., Box 2008, Kalamazoo, MI 49003, FAX (616) 381-4113.

Coolers

FC Series coolers are compact, non-refrigerated cooling systems that maintain water and non-sulfurized oil temperatures at or above ambient air temperature. Instead of using a continual supply of city water, the closed-loop systems cool and recirculate the water, which reduces water and sewer costs. Five basic units are available to dissipate from 20,000 to 285,000 btu/hour at 30F entering temperature differential between fluid and air. The units are available as complete, self-contained systems with tank, pump, and control panel, or as a basic system with only a coil and fan.
Koolant Koolers Inc., 2625 Emerald Dr., Kalamazoo, MI 49001, FAX (616) 349-8951.

Switches

The P120 Series of rotary-dip pushbutton switches feature built-in protection against erroneous signals. Spurious codes are minimized or completely eliminated because the position of the actuator and the resulting electrical output paths can be visually confirmed before depressing the actuator, which makes the electrical connection and generates the pulse. These 16-position ultra-compact switches are available in binary-coded hexadecimal and complement configurations. The body size is 0.441 inches² × 0.480 inches high and has a 0.100-inch-diameter spindle actuator with molded-in position pointer.
APEM Components Inc., Box 544, Wakefield, MA 01880, FAX (781) 245-4531.

Fasteners

POLY-LOK II patch-type self-locking fasteners allow the user the capability of specifying 15, 25, or 50 or more reuses of their bolts. POLY-LOK II is made from a special formulation of polyethylene terephthalate and is non-toxic and impervious to most chemical solutions. POLY-LOK II was first designed into the B-2 Stealth Bomber to take advantage of its multi-reuse capability.
Long-Lok Fasteners Corp., 10630 Chester Rd., Cincinnati, OH 45215, FAX (513) 772-1888.

Connectors

High-purity spigot end connectors are for products in the company's line of thermoplastic valves and controls. The spigot connectors are for semiconductor, pharmaceutical, and other industrial market sectors for process applications involving D.I. water and other ultra-pure liquids. The connectors are manufactured to meet the stringent high-purity requirements of these industries where crevice-free, contamination-free piping connections are mandated. The connectors are available in virgin, non-pigmented Polypropylene and Kynar® DVDF for both metric and IPS in 1/2- to 2-inch sizes.
Plast-O-Matic Valves Inc., 1384 Pompton Ave., Cedar Grove, NJ 07009, FAX (973) 256-4745.

Vacuum pump

The STING (Solid Teflon® Internally No Gaskets) compressed-air-driven pump is made from one piece of solid PTFE (Teflon) material without any gaskets. The pump requires neither maintenance nor the replacement of any sealing material, and features no moving parts. The pump's single-material construction means resistance to chemicals and the ability to operate in temperatures ranging from -320 to 392F. Maximum vacuum level is 28.5 inches Hg. Applications include refineries of oil products and use in the chemical process, pharmaceutical, and electronics industries.
PIAB Vacuum Products, 55 Accord Park Dr., Rockland, MA 02370, FAX (781) 792-0574.

Position indicator/transmitter

The Series QV Quick-View® valve position indicator/transmitter is for use with rotary and linear valves and actuators, manual valves, gear operators, and positioners, providing continuous indication. The design combines discrete rotary or linear-valve position indication with control provided by up to four mechanical or reed switches or a 4-20 mA transmitter output with up to two switches. Units feature optional backlighting for higher visibility in low-light areas. Durable polycarbonate housing is rated NEMA 4, 4X and is targeted for use in general-purpose and corrosive environments.
Dwyer Instruments Inc., Proximity Controls Div., Box 373, Michigan City, IN 46361, FAX (219) 872-9057.

Mainboard

The P6L40-A4X system mainboard is based on the Accelerated Graphics Port (AGP) standard and the Intel 440LX chip set. The mainboard takes advantage of the capabilities of the Pentium II processor by providing EDO/-SDRAM support, accelerated graphics port, 33 MHz ultra DMA, wake on LAN, advanced configuration power interface, and optional LAN desk management. The motherboards, which operate from 233 to 300 MHz, are PC98-ready. Four 168-pin DIM sockets support up to 512 Mbytes of memory capacity to accommodate demanding applications.
Tekram Technology Inc., 46712 Fremont Blvd., Fremont, CA 94538, FAX (510) 353-6089.

Card

The MCX-Lite/485 card handles functions beyond that of an industrial communications card, acting as a "PC within a PC" that completely manages the entire communications function. This frees up the PC's regular processor for other tasks, so that an entire PC need never be dedicated to the communications function alone. The MCX-Lite/485 includes either a 386SX-25 or a 486SLC-25 CPU and up to 16 Mbytes of RAM. The card can handle all signal input and output processing without calling on the motherboard CPU.
ACKSYS, BP 80, 78302 Poissy Cedex, France, FAX +33 1 39 11 47 96.

Transformers

SPT-042 gull-wing lead-style transformers feature small package dimensions for surface-mounted applications and are for use with automated pick-and-place assembly equipment. The SPT-042 is for dry circuits, and impedance ratio is 600{OMEGA}. The transformers can be used in voice as well as V.29 data applications. Maximum dimensions are 0.650 × 0.520 × 0.410 inch.
Prem Magnetics Inc., 3521 N. Chapel Hill Rd., McHenry, IL 60050, FAX (815) 385-8578.

Tool holders

Indexable-insert rough, semi-finish, and finish cylinder-boring tool holders are available with quick-change, pre-set nose pieces, coolant through spindle, and are compatible with all cylinder-boring machines. The indexable tool holders can combine semi-finish boring in forward feed, top chamfering, and finish boring on the return feed stroke. The indexable tool-cylinder boring holders eliminate tool grinding, allowing faster cutting speeds and up to 10 cutting edges per insert. The line of tool holders has been applied to conventional cast-iron, liner-style, and high-silicon aluminum engine blocks.
Advanced Cutting Tool Systems Inc., 25770 Groesbeck Hwy., Warren, MI 48089.

Gauges

Simplex GD1^TM and GD2^TM digital gauges feature a self-contained, all-stainless-steel sensor that features full-scale accuracy of ±0.25%, making either gauge targeted for use in lab and field testing applications in systems up to 10,000 psi. The GD1 and GD2 have a built-in transducer to allow direct mounting to the gauge adapter, eliminating the need for wires. The four-digit display features 1/2-inch characters. The GD2 features analog output that enables the operator to transmit PSI readouts to a computer for in-house reports and regulatory documentation.
Templeton, Kenly & Co. Inc., Simplex Div., 2525 Gardner Rd., Broadview, IL 60153, FAX (708) 865-0894.

Knobs

Ergonomic knobs for applications requiring fast, repetitive actuation are available in two styles. Grip knobs feature an elastomer coating and four large indentations on the side that provide a solid grip during various operations. They can accept a ball-and-spring assembly for click positioning. Lobe knobs allow the palm of the operator's hand to rest comfortably on the slightly concave top. The fingers rest within the lobes on the side of the knob. Both styles are made of fiberglass-reinforced technopolymers.
Elesa U.S.A. Corp., 2095 Midway Dr., Twinsburg, OH 44087, FAX (330) 963-7468.

Printer

The PTR1 24-pin flat-bed dot-matrix printer works in conjunction with the user's PC and economically prints any combination of numbers, letters, symbols, or custom legends on heat-shrink tubing for OEM applications. The printer can produce small to large runs of a specific identification label or marker on an as-needed basis. The 10-lb printer measures 15.13 × 4.82 × 7.5 inches and features a short, straight-through label feed for maximum label usage, ease of feeding, and an adjustable print-head gap that eliminates smearing.
Panduit Corp., 17301 Ridgeland Ave., Tinley Park, IL 60477, FAX (770) 889-9264.

Gearing

W30 Series Spiroplan low-horsepower right-angle gearing features wear-resistant steel-on-steel gearing. The series delivers torque up to 620 inches-lbs, depending on ratio, and is targeted for applications such as smooth-running light conveyors and pumps where no shock loading is required. The series features wear-resistant case-hardened steel gearing, lifetime lubrication, and an aluminum housing. Footprint and base-to-shaft center heights are identical whether the motor is mounted horizontally or vertically.
SEW-Eurodrive, Box 518, Lyman, SC 29365, FAX (800) 601-6195.

Carrier board

The IPOC-1747 IndustryPack® carrier board holds any two single-wide IndustryPacks and can deliver up to 100 I/O lines per 1747 PCI slot. The IPOC-1747 communicates with the 1747-OC open controller using its specially configured PC bus, and provides I/O for applications including analog, digital, parallel, serial, motion control, video/graphics, temperature control, telecommunications, and fieldbus.
SBS GreenSpring Modular I/O, 181 Constitution Dr., Menlo Park, CA 94025, FAX (650) 327-3808.

Sensor ICs

The TK1104X Series of low-power-consumption temperature sensor ICs are for consumer, automotive, industrial, and medical industries. These ICs feature linear output voltages with a scale factor of 5, 6, or 10 mV/C. They eliminate the requirement for linearization circuits in most specialized applications because the temperature coefficient is nearly constant over the complete temperature range. The series features 150 mW power consumption and an operating voltage supply range of 2.4 to 10V.
Toko America Inc., 1250 Feehanville Dr., Mount Prospect, IL 60056, FAX (847) 699-7864.

PCI card

The PCI/C42 combines the digital signal process of two 60-MHz TMS320C44 DSP chips with high-speed I/O on one full-length PCI card. This close coupling of DSP and I/O on the PCI/C42 provides users with a complete signal processing solution within a single PCI slot. Applications include noise vibration and analysis, radar, sonar, and instrumentation. The PCI/C42 can be configured as either a front-end pre-processor or as a complete parallel processing system.
Loughborough Sound Images, Loughborough Park, Ashby Rd., Loughborough, Leicestershire, LE11 3NE, England, FAX +44 1509 634450.

Fixture system

The Model TR-5-600 fixture system is for assemblies with up to 600 test points and consists of a reusable fixture press used with easily interchanged fixtures. The fixture system has a spring-probe transfer mechanism that makes interchanging test heads simple. The fixture can accommodate a unit-under-test with a test-probe of up to 11.75 × 8.5 inches. Using 0.5 inches linear travel, the fixture system can be used to probe single or dual-sided SMT and through-hole assemblies with standard spring-probes.
CheckSum Inc., Box 3279, Arlington, WA 98223, FAX (360) 435-5535.

Load buttons

The SLB Series of subminiature load buttons are for compression-only applications where space is limited. The matching surface must be flat for accuracy. The loading diameter is slightly convex for accurate load distribution. These sensors are manufactured from heat-treated 17-4 pH stainless steel, and the sensing element incorporates bonded foil-strain gauges.
Transducer Techniques Inc., 43178 Business Park Dr., Temecula, CA 92590, FAX (909) 676-1200.

Software

DesignLink is a bi-directional link between the graphic power of Pro/ENGINEER and AutoCAD Mechanical Desktop and TK Solver. A complete mathematical model for a design can be set up in TK Solver, taking advantage of TK's rule-based declarative syntax and its ability to solve a model multidirectionally. The user can solve the model with input values and lists on-hand, then explore all the relationships among key parameters. The user then conducts a complete analysis to get the numeric parameters as desired, then sends the numeric values to Pro/ENGINEER or the AutoCAD Mechanical Desktop.
Universal Technical Systems Inc., 1220 Rock St., Rockford, IL 61101, FAX (815) 963-8884.

Transducer

The Linear Variable Inductance Transducer (LVIT) is for limited-space applications. The LVIT-Z features infinite resolution and can be configured for linear-measurement applications. Featuring a design based on chemically etched planar coil technology, the LVIT-Z offers accuracy of better than ±0.5% non-linearity over the full stroke and is extremely fault-tolerant. The unit's differential operation assures high rejection of any common mode-error, providing high accuracy to the unit even in the harshest environmental conditions.
Lucas Control Systems, 1000 Lucas Way, Hampton, VA 23666, FAX (757) 766-4297.

Spacer

Die-cut honeycomb dielectric spacer is die-cut with a proprietary steel rule die and process. Applications include aircraft electronic antenna and those requiring a lightweight high-strength nonmetallic structural part with dielectric properties. Tolerances are ±0.030 inch on thickness.
PressCut Industries, 2825 Nagle St., Dallas, TX 75220, FAX (214) 350-4713.

Adhesives

The Durabond line of epoxies includes 14 application-specific products, including 10 two-part room-temperature-curing epoxies, two urethanes, a one-part heat-cure epoxy, and a two-part epoxy potting compound. Durabond products are resilient in tough environments, and are for OEM product assembly applications.
Loctite Corp., 1001 Trout Brook Crossing, Rocky Hill, CT 06067, FAX (860) 571-5465.

Wiring duct

ElectroDuct high-impact rigid vinyl wiring duct features mounting slots; "no-slip-grip" covers; and scored, snap-off sidewall fingers. The wiring duct is available in two basic styles and in up to 60 width and height configurations ranging from 3/4- to 8-inch widths. The BA6 Series is distinguished by its high-density slotted walls with a finger design offering true snap-on/snap-off cover capability. The DNG Series features conventional slotted walls with wire retaining fingers. Standard length is 6 ft, 6 inches.
Wieland Electric Inc., 49 International Rd., Burgaw, NC 28425, FAX (910) 259-3691.

Copier

The D size 24 × 36-inch FW870 electrostatic engineering copier features a long-lasting organic photoconductor drum and is targeted for mid-range applications The FW870 is targeted for use by architectural or engineering firms with in-house reproduction departments, where it can provide a replacement for diazo units. The FW870 produces same-size copies from original documents up to 36 inches × 12 ft.
Ricoh Corp., 5 Dedrick Pl., West Caldwell, NJ 07006.

Robot

AdeptOne XL direct-drive SCARA robot is for small-parts assembly and material handling. The AdeptOne XL robot features interchangeable joint 3 and joint 4 motors, easily accessible joint encoders, and improved diagnostic software. The robot has a large 800-mm reach and comes with either an 8- or 14-inch stroke. It has a maximum payload of 12 kg and an increased push/pull force of 45 kg. The AdeptOne XL robot system includes the AdeptOne XL robot, Adept MV controller and amplifier chassis, system front panel and manual control pendant, and V+^TM operating system.
Adept Technology Inc., 150 Rose Orchard Way, San Jose, CA 95134, FAX (408) 432-8707.

Motors

"RE" Series motors use powerful rare-earth magnets and graphite brushes to maximize torque available in a 26-mm-diameter package. This rhombic moving-coil design provides for long life, low electrical noise, fast acceleration, and high efficiency. The ironless rotor allows for zero cogging and simple, accurate control. Rated at 18W, the motor is 59 mm in length and weighs 150 gm. Different windings are available to match desired speed with available voltage. Maximum speed is 11,000 rpm while the maximum efficiency is 86% depending on the winding.
Maxon Precision Motors Inc., 838 Mitten Rd., Burlingame, CA 94010, FAX (415) 697-2887.

Integration

Myriad/Documentum Integration version 2.0 provides enhancements to the integrations between Myriad viewing software and Documentum's WorkSpace and SmartSpace enterprise document management systems. Documentum's annotation capabilities are used to store markup files in the Docbase. This means that the Documentum annotation function can be mapped to Myriad as the annotation tool for specific document formats. The Open dialog box allows users to type the name of the document in the Document Name field in Myriad instead of browsing the directory trees to find a known document.
Informative Graphics Corp., 706 East Bell Rd., Suite 207, Phoenix, AZ 85022, FAX (602) 971-1714.

Touch-entry devices

"X-Y Matrix TouchView®" transparent planar touch-entry devices (TEDs) provide optical clarity for products that incorporate LCDs and other flat-panel displays. The devices integrate two indium tin oxide (ITO)-coated sheets in a membrane construction--one sheet with etched conductive parallel bands along the X-axis, the other with similar lines along the Y-axis, which provides quick, accurate response for more than 1 million cycles.
C.A.M Graphics Co. Inc., 15 Ranick Dr. W., Amityville, NY 11701, FAX (516) 842-1005.

Spot-curing system

The PC-3 ultra-medium-intensity UV spot-curing system is for the curing of adhesives, sealants, coatings, and encapsulants and delivers UV light concentrated primarily in the UV-A range at an intensity of 2,500 mW/cm². The system features a wand, built-in filter, safety interlock device which shuts the lamp off when the cover is lifted, and a bulb-viewing lens. The lapse-time meter is located on the front of the unit, and the foot- pedal connection is removable.
Dymax Corp., 51 Greenwoods Rd., Torrington, CT 06790.

Sensor

The E2J capacitive proximity sensor offers users a compact sensing system for non-metallic and metallic sensing applications. A sensitivity setting on the amplifier allows fine-tuning for tough detection applications such as those involving vibration, indirect detection, and variations in target material. The separate amplifier also allows remote mounting of the detection head in space-confined sites without complicating setup or compromising monitoring. With optional extension cables available in 3.28- and 6.56-foot lengths, the sensing head can be mounted up to 9.84 feet away from the amplifier without affecting reliability.
Omron Electronics Inc., 1 E. Commerce Dr., Schaumburg, IL 60173, FAX (847) 843-8081.

Inverter

The S Series of dc to ac inverters measures less than 8 × 16 × 72 mm, and can be specifically designed to meet the requirements of any single-tube backlit LCD. Three dimming options are offered--pulse-width modulated-controlled, resistive-controlled, and voltage-controlled. The S Series features efficiencies as high as 90%. Applications include those where the inverter needs to be mounted near the display, including gas station pumps, video/Internet telephone systems, and hand-held equipment.
ERG Inc., 2601 Wayne St., Endicott, NY 13760, FAX (607) 754-9255.