Product News 28940Product News 28940

DN Staff

August 20, 2001

5 Min Read
Product News

Accelerometer mount

Model 608A11 low-cost industrial accelerometer with integral cable is said to ease the permanent installation of vibration sensors onto critical machinery components or into inaccessible locations. Options include accessory hardware including swivel mounted studs and collars for ease of installation and removal for testing, verification and calibration without disturbing the cable.

PCB Piezotronics, www.pcb.com
Enter 646

Piezoelectric accelerometer

Isotron(R) Series 65 is a miniature tri-axial piezoelectric accelerometer with integral electronics, designed specifically to measure modal responses in three orthogonal axes simultaneously on lightweight structures. The product is adhesive-mounted and is also said to offer high output sensitivity, high resolution, a frequency response of 1-6 kHz, and low impedance output in extreme environments.

Endevco Corp., www.endevco.com
Enter 647

Chipset

The VSC8185 16:1 multiplexer and VSC8184 1:16 demultiplexer provide a feature-rich chipset that operates from 11.5 to 12.5 Gbytes/sec to support high-gain Forward Error Correction (FEC) operations. The VSC8184 and VSC8185 enable telecommunication equipment providers to serialize and de-serialize high-gain FEC data streams for ultra-long haul DWDM applications. These devices use a single 3.3V power supply and dissipate less than 3.5W of power for the total chipset.

Vitesse Semiconductor Corp., www.vitesse.com
Enter 648

Spectrometers

M2000 series laboratory spectrometers are said to be durable and reliable instruments for use in general purpose spectroscopy, quality assurance and quality control measurements, service labs, and academic applications. The product is said to provide 0.5 cm-1 resolution, a choice of DTGS, MCT, or dual detectors, and industry standard GRAMS/32 software from Galactic.

Midac Corp., www.midac.com
Enter 649

Power factor correction

Designed specifically for use in high-performance OEM servo applications, PFC300X series high-voltage, high-capacity Power Factor Correction modules attenuate ac line harmonics induced by switching power amplifiers, and prevent overloading of neutral conductors and transformers. The devices measure 8.68 x 8.400 x 4.130 inches, have an input range from 185 to 240V ac-rms 50/60 Hz, and output a dc-regulated bus from 395 to 420V dc maximum.

Automotion Inc, www.automotioninc.com
Enter 650

Vision sensor

F150-3 Vision sensor provides a two-camera measuring capability at a low cost. Features include a vision sensor with an intelligent light source which allows the user to set light intensity and direction during inspection routines for more accurate inspections, while Windows(R)-based configuration software is said to help users quickly and easily set up powerful and flexible inspection programs.

Omron Electronics Inc, www.info.omron.com
Enter 651

CMM controller

This company's UCC1 Universal CMM controller is said to optimize the CMM/probe interface for maximum part check speed and accuracy in both OEM and retrofit applications. Features include a flexible controller which allows CMMs to operate in three modes: standard touch-trigger, digitizing with analog probes, and full high-speed scanning, while advanced scanning algorithms are said to allow fast, accurate, adaptive part scanning.

Renishaw, www.renishaw.com
Enter 652

Pressure transducers

This company's 80HP hermetic pressure transducers are the latest addition to their line of industrial sensors. The products are said to be media compatible, amplified, and designed for applications such as plant automation and control, hydraulics and pneumatics, compressor and pump controls, alternative power solutions, HVACR, and construction equipment.

Texas Instruments Inc., www.ti.com
Enter 653

Thickness probe

ERCu measurement probes are designed to measure copper coating thickness on laminates and multilayers without being affected by the copper coating on the opposite side. The product uses the electrical resistance method of measurement and is designed to work with the company's Multi Measurement System (MMS(R)) instruments for measuring coating thickness on printed circuit boards.

Fischer Technology, www.fischer-technology.com
Enter 654

Proximity sensors

GMR series magnetic proximity sensors are based on giant magnetoresistive technology, and are said to be highly sensitive for rugged use in harsh or high-temperature applications such as industrial equipment and off-highway vehicles. The product is said to yield a large air gap between the sensor and the magnet, and uses an omnipolar sensing element which allows the sensor to activated by either the north or south pole of the magnet.

Cherry Electrical Products ,www.cherrycorp.com
Enter 655

Temperature switch

THR series temperature switches are designed for use in heavy industrial environments. Measuring 3 x 4.5 x 5.62 inches, the switches feature a high anodized cast aluminum housing which is said to provide NEMA 4 protection. The products are single setting, while set point is field-adjustable with a robust knob and a large, easy to read calibrated dial set inside a tamper-proof cover.

Barksdale, www.barksdale.com
Enter 656

Hazmat response kit

Deluxe HazMat Kit III is said to offer a two-step approach to identifying unknown airborne compounds through the use of detector tubes. Step 1 uses two multilayered qualitative tubes and a color chart to reportedly identify more than 70 compounds in under three minutes. Step 2 involves another 13 detector tubes and a decision-tree style logic chart to further qualify the results of the first step.

Sensidyne, www.sensidyne.com
Enter 657

Component inspection

NXR-130 ultra high-resolution X-ray-based failure analysis system is said to provide fast, high quality, real-time images for failure analysis of components on PCBs. The product is said to have a 230x magnification capability, an 8mu focal spot, and X-ray source to 120 kV for inspecting the smallest assemblies. Also featured is 5-axis control, which can be used alone or with the standard rotate and tilt positioner.

Nicolet Technologies, www.niti.com
Enter 658

Sign up for Design News newsletters

You May Also Like