Micrel's New Zippy2 Ethernet Combo Board in Stock at Digi-Key Corporation
May 12, 2010
MOTION CONTROL: Electronic components distributor Digi-Key Corporation announced it has stock on Micrel’s Zippy2 Ethernet Combo Board, the KSZ8851SNL-BBE-EVAL evaluation board for the KSZ8851SNL Ethernet controller.
Jointly developed by Micrel and TinCanTools, the Zippy2 Ethernet Combo Board is a low-cost Ethernet expansion board for the BeagleBoard. It is available for purchase on Digi-Key’s global websites and will be featured in future print and online catalogs.
The Zippy2 provides a standard 10/100BaseT (10/100Mbit) Ethernet interface and uses Micrel’s KSZ8851SNL SPI-to-Ethernet controller. It also provides a second SD/MMC interface that supports 3.3V and 1.8V SD memory cards as well as a second RS232 serial interface with two serial connectors.
Support for the Zippy2 is also available on Digi-Key’s website where users can access information such as schematics, gerbers, and a BOM specifically for the Zippy2. On the Zippy2 support website, users also have access to software links for the Linux driver, as well as links for additional support.
Additionally, the Zippy2 provides a Real Time Clock (RTC) with backup battery power provided by a small 3V lithium coin battery. An I²C interface connector allows access to I²C signals that have been level translated to 5V to allow easy connection to standard 5V peripherals. An AT24C01 serial EEPROM is also provided and contains a vendor ID and a device ID used to identify the type of board connected to the expansion header.
-Edited by Kelsey Anderson
About the Author
You May Also Like