Red Tape and 5 Market Disruptors: What’s Next for Medical Device Design: Page 2 of 2

With engineering developments enabling customized, remote, and otherwise futuristic healthcare options, Metaphase Design Group’s Bryce Rutter shares his thoughts on how medical device design is being optimized and what hinders it.

2. Robotics

“The whole area of robotics is transforming surgery,” notes Rutter. “It’s transforming it because the robotics can shrink down to a size and be controlled through some type of surgeon interface that allow minimally invasive surgeries, which were typically considered to be laparoscopic, to be shrunk down even further. The research is in that the less disruption you do to the body in any procedure, the faster the recovery time. Robotic surgery, when it allows you to get small and very precise and actually makes surgeons better surgeons, has a dramatic impact on the speed and efficacy of the surgery.” Expect this area to make strides quickly, as it’s public knowledge that two big companies--Stryker and Medtronic--are looking at that area and have put together groups to pursue business.

3. Remote Care

People everywhere have begun doing more for themselves at home than at a clinic or hospital, and this trend is only expected to increase. According to Rutter, “The increase in self-administered drug regimes through auto-injectors or wearables—for example, a wearable that you would slap on your belly that slips a cannula subcutaneously, which would be automated and deliver a certain amount of a drug at specific intervals—that’s an area that would be quite disruptive in terms of the pharmacology side and how we actually deliver drugs. Rather than having to go into the doctor’s office to get a shot or go to the hospital or clinic to get an IV drip, we’re all going to be taking care of that ourselves.”

4. Personalized Care

This impressive trend is going to personalize pharmacology and be extremely disruptive while having a very positive output for patients. As Rutter describes it, “By taking our blood and spinning it down and testing it against a variety of potential drugs that could help us and also ‘type training’ each of those drugs, the future will be that the doctors say, ‘Alright, for Bryce, we want you to take this drug and because of your body mass, metabolism, and disease state, this is the perfect concentration for you.’” Three of us could have the same disease, he notes. But because it’s personalized, the amount of drug and the frequency at which we would take it would be customized to our own bodies.

5. “Smart” Instruments

Another area that’s going to be disruptive, generally speaking, is having manual instruments be “smart,” Rutter tells Design News. Here, embedded in manual instrumentation is some technology that will facilitate their use by providing certain types of feedback to the user.

As companies evolve their design and manufacturing processes to incorporate and even create these technologies, they also need to balance the need for input from end users. “With the  FDA’s requirement for formative and summative testing, you have to go out and talk to the people who use your design,” Rutter notes. “Until that was a mandate, about 75 percent of all healthcare manufacturers would engineer products with incredible technology, but forget that there were users involved—actual humans that had to pick it up, figure out how to use it, and much of that fantastic technology couldn’t be accessed because it was so difficult to use or so non-intuitive.”

According to Rutter, the impact of this mandate—to run usability testing regimes on products through the early development phases and then, as you zero in on a final design, testing that design with actual users—and also being forced by the FDA to test with all different types of users because they all have different experiences and capacities, both physical and cognitive—has really had a very positive effect. It means that the products that get to market now have really taken into account users of all types. Between such user insight and the evolution of technology, the design of medical devices will continue to improve—making healthcare easier, more comfortable, and more effective.

Nancy Friedrich recently joined Design News as Editor-in-Chief and Content Director. With a 20-year background in covering the electronic and mechanical engineering segments, Nancy has expertise across many areas. At Design News, she plans to focus on wireless and related areas.

Atlantic Design & Manufacturing, New York, 3D Printing, Additive Manufacturing, IoT, IIoT, cyber security, smart manufacturing, smart factoryINSPIRE. COLLABORATE. INNOVATE. Atlantic Design & Manufacturing, part of the largest advanced design and manufacturing industry event on the East Coast, is the annual must-attend trade show for discovering the latest in design engineering. Source from the region's most comprehensive collection of cutting-edge suppliers, deepen your expertise with free, conference-level education, and network with thousands of professionals who can help you advance your projects — and your career. From prototyping to full-scale production, one lap of the show floor will help you overcome your toughest manufacturing challenges and keep you up to speed on innovations transforming the industry. Everything you need to take projects to market faster and more cost effectively is here. Click here to register for your free pass today!

 

Comments (0)

Please log in or to post comments.
  • Oldest First
  • Newest First
Loading Comments...