October 22 – Day 2 – Implementing TCP/IP with a Nordic nrf52832
The Nordic nrf52832 is a Bluetooth IC based on an ARM Cortex-M4 core.  Today’s lecture will demonstrate the nrf52832’s ability to execute a TCP/IP application. The TCP/IP application is twofold and consists of communications over TCP/IP between...
October 21 – Day 1 – TCP/IP Fundamentals
The lecture series will begin by defining the elements that make up TCP/IP. The knowledge gained from our study of basic TCP/IP operations and concepts will be supported with the realization of an ENC28J60-enabled IoT device.
September 27 – Day 5 – Putting it All Together
For our final class, we will use the NXP NTAG Explorer kit to read and write the tag’s info that we access with our app to close the loop between the phone and our embedded device. We will look at the tradeoffs and areas for improvement for the...
September 26 – Day 4 – Adding NFC Capability and Communications to Our App
For our penultimate class, we will look at ways we can implement NFC capability to our app so we can communicate via the phone’s NFC interface with a passive tag to sense, identify and read and write to the tag.
September 25 – Day 3 – Building an Android Application from Scratch
Now that we have our development environment set up from the first class, we will go through the steps of developing our basic android application. For our third day, we will build the basic structure and user interface, and test it on the phone.
September 24 – Day 2 – An NFC Primer and Introducing the NXP NTAG
Our second day will be spent learning the basics of Near-Field Communication (NFC) and what the standard specifies for various classes of passive transponder tags. We will define the tag type we will use and what parameters we need to pass back...
September 23 – Day 1 – Introduction to the Project and Development Environment
We will start our first day by introducing the project goal – write an application on an android phone that will allow us to control and communicate with our embedded device. We will also walk through the steps of installing the android...
August 30 – Day 5 – Smart Vision Devices
Participants will engage with smart vision devices topic through a hands-on lab project. A discussion on intelligent cameras will be presented to participants including basic components of the smart vision device. Participants will explore this...
August 29 – Day 4 – Industrial Uses of Vision Devices
Applications of vision devices in the industrial sector will be discussed in Day 4 of the webinar course. Participants will apply the vision system pipeline discussed in Day 2 for categorizing vision applications with the industrial sectors...
August 28 – Day 3 – Machine Vision System Components
This session will discuss the major components of a machine vision system with participants. Also, off-the-shelf vision devices for makers, educators, and engineers will be identified and explored in this session...
  • Load More
  • first
  • previous
  • 1
  • 2
  • 3
  • next
  • last
Load More