Design News is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Fluid Power

Fluid Power

Safety valves

Lift lever and soft seat configurations

The Series 211 and Series 632 safety valves for air, gas, steam, and liquid applications are designed to provide reliable overpressure protection in system components. They feature a dual-ring construction to offer reportedly easy adjustment, precise opening, and high volume, short blowdown with high liquid flow capacity. The disk and nozzle are changeable to accommodate changing conditions and processes. They are ideal for a variety of applications, including air and gas compressors, piping, boilers, and accumulators.

Spirax Sarco Inc. http://rbi.ims.ca/3844-577

Amplifying nozzles

Reduces air consumption

The Energy Saver air nozzles and jets are designed to significantly reduce compressed air consumption by amplifying the air output. Its design forces the air through a 0.002-inch annular orifice, accelerating airflow and entraining surrounding air as it exits the nozzle. Airflow volumes out of the nozzles are reportedly 25 times more than the compressed air supplied. A range of high and low thrust models are offered.

ITW Vortec http://rbi.ims.ca/3844-578

Progressing cavity pumps

With long life

L-Frame progressing cavity pumps are designed for handling clean, chemical feed applications, and viscous, abrasive, solids-laden slurries and sludge. They feature non-pulsating and metered flow, low product shear, capacities to 450 gpm, pressures to 2,100 psi, and viscosities over 1,000,000 cps. They also reportedly handle entrained air and gases without vapor locking. They are available with a variety of sealing configurations, drive options, motors, and controls.

Moyno Inc. http://rbi.ims.ca/3844-579

Valve

With stainless steel cap

Designed for trouble-free use in applications requiring minimal maintenance and maximum lifetime, the VICI Mini Diaphragm valve is ideal for the process industry, automated lab analyzers, and continuous-monitoring environmental analyses. Three different configurations are available: a 5 port internal injector, a 6 port sampling/switching valve, and a 10 port multifunctional valve. The standard bore size is 0.016 inch and optional bore sizes are 0.010 and 0.030 inch.

Valco Instruments http://rbi.ims.ca/3844-580

Flexhose

Standard length of 25 ft

With a reinforced construction that is designed for long life, the AHPLUS flexhose can withstand a temperature range from -60 to 275F. It is featured in a royal blue color so it may be easily visible in both small and industrial settings. It is reportedly moisture- and tear-resistant and has a higher temperature range than neoprene/fabric hoses. It is ideal for such applications as dust collection, bridge painting, industrial ventilation, drying, boat building, and fume collection.

Air Handling Systems http://rbi.ims.ca/3844-581

Valve terminal series

Miniaturized sizes

Offering versatility, high speed and flow rates, and compact sizes, CPV-SC and CPA-SC "smart cubic" valve terminals are available with various valve functions. The SPV-SC is plate mounted and offers a choice of 4, 8, 12, or 16 valve positions. The CPA-SC is sub-base mounted and offers a range of electrical connection schemes for standard connections and plug-in sockets, including multi-pin connectors.

Festo http://rbi.ims.ca/3844-582

Recirculating chillers

With readouts and alarms

Incorporating such features as a digital pressure/flow rate display and user-settable temperature, pressure, and flow rate alarms, the company's recirculating chillers are designed to provide reliable cooling for a variety of industrial, laboratory, laser, and metalworking applications. They reportedly maintain process temperatures from -10 to +20C with plus or minus 0.1C stability. They are available with .25 to 1 hp compressors.

PolyScience http://rbi.ims.ca/3844-583

Vacuum pump inlet traps

Range of configurations

Available for processes with flows up to 2,500 cfm at 1 Torr, the MV Vacuum Pump Inlet Traps can reportedly protect systems from fluid contamination, failures, and downtime. They range from the 4-inch diameter PosiTrap(R) to the three-stage 16-inch diameter MultiTrap(R). They are able to be supplied with a range of replaceable filter elements for particle filtration, chemical absorption, and condensation. Included is stainless steel gauze, copper gauze, molecular sieve, activated alumina, activated charcoal, Sodasob(R), and pleated polypropylene.

Mass-Vac Inc. http://rbi.ims.ca/3844-584

Valve

With ideal sealing material

The 32-port custom valve solution is based upon a standard inert rotary valve that features a stainless steel rotor and a PTFE body that reportedly is virtually inert to all chemicals and stable up to 200C. It features internal 4-mm diameter flow paths and an optical encoder that is designed to accurately position the rotor and maximize flow rates. It is driven by a 24V dc motor using computer-controlled TTL compatible signals, and it measures 210 x 140 x 110 mm.

Bio-Chem Valve http://rbi.ims.ca/3844-585

3D air filter models

Accelerates product development cycle

The SolidWorks 3D models of the company's customized air filters are designed to help speed up the product development cycle. Accessing the products simplifies the process of users identifying products that will integrate seamlessly with their electronics equipment designs. They reportedly allow users to quickly zero in on the best thermal management or EMI/RFI shielding design for their equipment, helping them to weed out designs with potential assembly and manufacturing difficulties.

Universal Air Filter Co. http://rbi.ims.ca/3844-586

Industrial pumps

Self-priming, smooth operation

Hydra-Cell D35 Series industrial pumps, available with an oil level monitor, are designed to detect dramatic oil level changes in the pump. The positive displacement pumps incorporate five Hydra-Cells into a pentaplex design, reportedly enabling them to provide steady, pulse-free flow under demanding pumping conditions. They are ideal for such applications as automotive plants, oil refineries, paper mills, and chemical processing plants.

Hydra-Cell Industrial Pumps http://rbi.ims.ca/3844-587

Disposable filters

Reduces costly warranty calls

Balston brand disposable filter units are available in sizes ranging from 1 to 5 inches long and in gas filtration efficiency up to 99.999+% at 0.01 micron. They are ideal for OEM and reseller applications. Vapor adsorption models are available, as are oil indicating elements and integral barbed connections.

Parker Hannifin http://rbi.ims.ca/3844-588

Diaphragm check valve

Not dependent on gravity

Designed for use with highly aggressive or ultra-pure liquid applications, the Series CKM diaphragm check valves reportedly maintain bubble-tight seals in whatever position they are mounted. Its patented diaphragm is intended to automatically position itself against the valve seat in an identical location each time. They are chatter- and leak-proof and have no internal sliding or loose parts to slam or vibrate, according to the company. They are available in sizes .50, .75, and 1 inch NPT.

Plast-O-Matic Valves Inc. http://rbi.ims.ca/3844-589

Hide comments
account-default-image

Comments

  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Publish