PEM Concealed-Head Studs and Standoffs

DN Staff

February 17, 2010

1 Min Read
PEM Concealed-Head Studs and Standoffs

MATERIALS: PEM® self-clinching concealed-head studs and standoffs install permanently in steel or aluminum sheets as thin as .062 inches/1.6 mm to provide strong and reusable threads for mating hardware in a wide range of thin-metal assembly applications. Their concealed-head feature contributes particular design benefits by allowing the side of the sheet opposite installation to remain smooth and untouched. This feature additionally serves to satisfy applications where the sheet must remain completely sealed from air, liquid, dust, gases or other potentially infiltrating elements.

The aluminum or stainless-steel studs are available in thread sizes #4-40 through #10-32 and M3 through M5 and in lengths from .250 inches through 1 inch and 6 mm through 25 mm. Stainless-steel standoffs are offered in thread sizes #4-40 through 1/4-20 and M3 through M6 and in lengths from .187 inches through 1 inch and 4 mm through 25 mm.

Sheet preparation for their installation requires only a blind milled hole to the recommended minimum depth. Using a PEMSERTER® or other standard press, installation is accomplished by placing the fastener in the hole and applying sufficient squeezing force. The fastener head then locks securely in the sheet and can handle substantial loads.

These fasteners are RoHS-compliant and some stud types meet NASM63540 specifications. Detailed specifications (Bulletin CH) and free part drawings (PEM CAD Library) can be accessed at www.pemnet.com.

materials-pem-forweb.gif

-Edited by Kelsey Anderson

Sign up for the Design News Daily newsletter.

You May Also Like