HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Content by Christian Légaré
Christian Légaré
Member Since: October 17, 2012
Blogger
Blog Posts: 5
Posts: 73

Most Recently Posted

All (78)          Blogs(5)          Comments(73)         
All
Nov 30 - Day 5: USB From the Host Side
Continuing Education Center 
11/30/2012  218 comments
Day 5 begins with a discussion of USB hosts, which are the most complex component in USB technology. We then are able to draw the differences between device, host, and on-the-go USB software stacks. The memory footprint for typical hosts and devices is described. Finally, the requirements for USB compliance are explained.
Nov 29 - Day 4: USB From the Device Side
Continuing Education Center 
11/29/2012  238 comments
Day 4 is all about USB devices -- what they are, and what they can be. When a USB device is first connected to the bus, it triggers a process called enumeration. This event is a crucial phase of the USB protocol. USB classes are also presented, which allow USB devices to take on multiple functions.
Nov 28 - Day 3: Understanding the USB Protocol
Continuing Education Center 
11/28/2012  276 comments
Day 3 presents the complex structure of the USB protocol, which operates above the basic level of transmission and reception of bits over copper wires. Discussed are the concepts of USB packets, transfers, transactions, frames, and endpoints. These concepts are essential to meet performance expectations.
Nov 27 - Day 2: USB Over a Single Wire Pair
Continuing Education Center 
11/27/2012  263 comments
Day 2 presents the methods and circuitry used in USB 1.1 and USB 2.0 to transmit and receive data over a single wire pair. The methods for USB 3.0 are also presented. The physical layer is examined. For compliance purposes, it is often sufficient to follow the semiconductor vendor reference designs.
Nov 26 - Day 1: Implementing USB in Embedded Products
Continuing Education Center 
11/26/2012  295 comments
Day 1 begins with a discussion about implementing USB technology in embedded products. This task can be challenging because of the restricted hardware resources available in embedded systems. USB topology is presented, which is a determining factor in what you can and cannot do with this technology. Finally, the mechanical specifications of USB are described.


Partner Zone
Latest Analysis
DIY candy, journeys to Mars, coding for road trips, and more. These STEM (science, technology, engineering, and math) activity options will keep kids engaged this summer, from 10-minute activities to more advanced undertakings.
Nothing is more frustrating than developing a plan and then, in the heat of the battle, having to diverge from the plan when chaos happens.
In June, teams from across the US, and several countries worldwide, competed for awards in multiple categories at the 2016 Formula SAE Lincoln competition.
A 45-minute per day free course will take place July 11-15, and will walk engineers through a hands-on approach to debugging real-time embedded software.
Forget doping. Officials at this year’s Tour de France are looking for a very different form of cheating -- electric motors hidden inside the seat tubes of bicycles.
More:Blogs|News
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9 | 10


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service