This technology improves each year and the ability to provide components of greater size seems to be a weekly event. Sciaky has obviously proven to their impressive list of clients they can do the job. Also, the deposition rates are truly astounding. With R&D, time is money and proving a design relative to form, fit and function using "additive" manufacturing makes sense for even the most skeptical engineers and engineering managers. Excellent post Ann. Very informative.
Ann, holding higher levels of accuracy is demanding, and doing it over larger areas certainly requires taking additional challenges into account. Consider that as metal is machined, the internal stresses that were restrained by the portion that is removed now are free to change the size of the part a bit. One more challenge to building a bigger machine that is accurate. So correcting for these changes is extra effort that adds to the expense of making a big machine accurate. But they are indeed producing accurate large machines, and developing new methods of 3D printing, as well as improving those methods that have been used for many years. That part is alos quite interesting.
But I am still waiting for the announcement of a "replicator" like they have i Star Trek. BUT how would one "print" a cup of coffee?
William, thanks for another of your most interesting ideas: changing alloys for different parts of an assembly. I agree, it's tough to maintain accuracy and repeatability in large machines, but the fact that this technology is use in aerospace production parts says a lot, doesn't it?
The repeatability of robot-printed parts should be better than some of the diecasting processes and also better than parts machined from stock materials. Of course it will require adequate maintenance of the machinery and the right materials, as would any high quality production method.
One very interesting option is the changing of alloys for different parts of the assembly, which could allow varied properties all in one part. Presently that is a very expensive thing to do, so this couold lead to a good cost reduction, as well as new design options.
Keeping larger machines accurate has always been a challenge, but it has been met by quite a few machine building companies, so it will not require a breakthrough to make it happen. The real challenge will be in the programming and in the materials handling aspects of the process.
78RPM, that fighter jet wing box wasn't a suggested app--it's one Sciaky has already made, as we reported last year at this link given in today's story: http://www.designnews.com/author.asp?section_id=1392&doc_id=258652 Regarding relative strength of metal parts made with 3D printing, we've also covered that subject extensively. The most recent is NASA discovering that 3D-printed metal rocket engine injectors actually perform better than welded ones over repeated tests: http://www.designnews.com/author.asp?section_id=1392&doc_id=274042 There's also extensive discussion in the comments to that story about the strength issue, and in the comments to this one: http://www.designnews.com/author.asp?section_id=1392&doc_id=273908
It's interesting that one suggested application is an "entire wing box for a jet fighter plane." Having worked in engineering flight test early in my career, I know how rigorous the testing is for wing flutter -- harmonic vibration that could threaten snap-off of a wing. I know that the best 3D software can analyze and suggest the best shape of parts for strength and weight. My question to anyone out there is: When a 3D printer lays down a bead of metal upon another, does the strength of the total part come close to that of a part stamped from sheet metal or a part cast in one piece?
Siemens and Georgia Institute of Technology are partnering to address limitations in the current additive manufacturing design-to-production chain in an applied research project as part of the federally backed America Makes program.
Most of the new 3D printers and 3D printing technologies in this crop are breaking some boundaries, whether it's build volume-per-dollar ratios, multimaterials printing techniques, or new materials types.
Independent science safety company Underwriters Laboratories is providing new guidance for manufacturers about how to follow the latest IEC standards for implementing safety features in programmable logic controllers.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.