HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Ann R. Thryft
User Rank
Blogger
Re: More control = ?
Ann R. Thryft   6/30/2014 6:28:29 PM
NO RATINGS
Cabe, at the link given in the article, Autodesk's description says Spark is open platform, which isn't at all the same thing as open source that your article states. I find it much easier to believe Autodesk is going open platform than open source. Open platform usually means based on open standards, such as software with a fully documented, published API, or hardware based on a non-proprietary OS and/or chips. Open source means you get access to the source code and can modify it. An example from ancient tech history: open platform is what happened when Cisco lost its proprietary death grip on the router market in the 1990s because others started building routers with Intel chips and the Microsoft OS, vs Cisco's own proprietary ASICs running their proprietary OS.

Cabe Atwell
User Rank
Blogger
Re: More control = ?
Cabe Atwell   6/30/2014 5:04:39 PM
NO RATINGS
When the CAD software understands the material limitation, it can offer recommendations to the part design. IE: a flange has to be "x" thick to support "y" amount of stress.

Though, I think their plan is abit more nebulous right now. 

C

AnandY
User Rank
Gold
RE: Hopes for the Near Future.
AnandY   6/28/2014 5:58:16 AM
NO RATINGS
Autodesk bringing in such a technology is a big step towards the improvement of technology. A 3D printer is one thing that can revolutionize all office activities if offices start using them. This means quality work in offices and good results in return. What the company now should do is make this technology affordable to the average consumer and this definitely will benefit both the consumer and the producer at the same time.

Ann R. Thryft
User Rank
Blogger
Re: More control = ?
Ann R. Thryft   6/27/2014 11:07:16 AM
NO RATINGS
Cabe, I was asking what kind of added control over the printer this software adds? More control over what? Properties of printed parts?

Cabe Atwell
User Rank
Blogger
Re: More control = ?
Cabe Atwell   6/27/2014 3:14:55 AM
NO RATINGS
More control, since the CAD software is directly connected to the printer, so to speak. It is a step up on most printers today, but not for long. CAD to printer seems to be the popular trend.

Also, good to see another resin printer on the market.

C

Ann R. Thryft
User Rank
Blogger
More control = ?
Ann R. Thryft   6/26/2014 12:31:05 PM
NO RATINGS
Thanks for reporting this, Cabe. I've been wondering what, if anything, Autodesk was planning in the 3D printing space. To go open source is an interesting and significant move by a major supplier. But how exactly does Spark software give uses more control over the printing process? Does this mean specifying the properties of printed parts, such as material type, stress tolerance, and mechanical properties?

William K.
User Rank
Platinum
Re: Hopes for the near future
William K.   6/25/2014 4:43:30 PM
NO RATINGS
It seems like AutoDesk is making a smart business move. It would be interesting to see all the details of their business plan.

Randolph Garrison
User Rank
Iron
Hopes for the near future
Randolph Garrison   6/25/2014 10:06:01 AM
NO RATINGS
I used autocad for a number of years, however it is time to learn 3D cad.  I had started working with a free down load of Design Spark when the news was released that AutoDesk had purchased them.  I am plesed to hear that AutoDesk is keeping it available at least for now.  I could hope for some standardization with Auto CAD to make life easier.





Partner Zone
Latest Analysis
A bold, gold, open-air coupe may not be the ticket to automotive nirvana for every consumer, but Lexus’ LF-C2 concept car certainly turned heads at the recent Los Angeles Auto Show. What’s more, it may provide a glimpse of the luxury automaker’s future.
Perhaps you didn't know that there are a variety of classes, both live and archived, offered via the Design News Continuing Education Center (CEC) sponsored by Digi-Key? The best part – they are free!
Engineer comic Don McMillan explains the fun engineers have with team-building exercises. Can you relate?
The complexity of diesel engines means optimizing their performance requires a large amount of experimentation. Computational fluid dynamics (CFD) is a very useful and intuitive tool in this, and cold flow analysis using CFD is an ideal approach to study the flow characteristics without going into the details of chemical reactions occurring during the combustion.
The damage to Sony from the cyber attack seems to have been heightened by failure to follow two basic security rules.
More:Blogs|News
Design News Webinar Series
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
12/10/2014 8:00 a.m. California / 11:00 a.m. New York
11/19/2014 11:00 a.m. California / 2:00 p.m. New York
11/6/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Jan 12 - 16, Programmable Logic - How do they do that?
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  67


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service