HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Page 1/2  >  >>
JimT@Future-Product-Innovations
User Rank
Blogger
Re: Really cool, but expensive
JimT@Future-Product-Innovations   2/26/2014 1:25:09 PM
NO RATINGS
On the issue of cost, MEMS fabrication methods are always that high (and even higher) at inception, but will fall fast based on the huge volume potential.  I can easily envision this at $1 in the very near future. But I see a possible drawback in the intended application.  Reed switches are by nature, 'vicinity' switches.  They are activated when magnetic field comes close to them. Once swallowed, it is going to get 'out-of-vicinity' of a passing magnet.   I suppose if the design-intent is to swallow a switch (within whatever host device) and then undergo a powerful MRI, I could see the switch activating.  But a more conventional handheld magnetic actuator, such as a pace-maker programmer for example, would have to output a substantially higher magnetic field than is presently achieved to activate the switch, assuming its resident within the bowels of the digestive tract.  That's pretty deep.

Charles Murray
User Rank
Blogger
Re: Really cool, but expensive
Charles Murray   2/21/2014 3:40:42 PM
NO RATINGS
Yes, a2, I think that the applications mentioned here are appropriate due to necessity. They are definitely high-end, and most applications don't call for a reed switch that costs several dollars. As the price goes down, though, the number of applications will rise.

Pubudu
User Rank
Platinum
Re: Really cool, but expensive
Pubudu   2/21/2014 7:52:13 AM
NO RATINGS
Yes a2, price comes to second place for sure, and when we talk about quality it should be illustrated through the every access such as quality, accuracy etc.......

Pubudu
User Rank
Platinum
Re: Really cool, but expensive
Pubudu   2/21/2014 7:41:12 AM
NO RATINGS
Very true elizebath I also do agree with you on this. It's worth paying a premium price if the product is really a good rather than taking a risk with a low price, specially when it comes to an health care product.

a2
User Rank
Gold
Re: Really cool, but expensive
a2   2/20/2014 10:14:03 PM
NO RATINGS
@Pubudu: I don't think its in the affordable level as such. Its more likely that they have to buy it since it's a must for their health  

Pubudu
User Rank
Platinum
Re: Really cool, but expensive
Pubudu   2/20/2014 6:55:58 PM
NO RATINGS
True Elizebeth its seems to be that the company is practicing marketskiming pricing at the introductory level. Anyway, when it comes to medical devices its still in the affordable level by the individuals.

Charles Murray
User Rank
Blogger
Re: Really cool, but expensive
Charles Murray   2/20/2014 4:36:53 PM
NO RATINGS
Right now, an ingestible enoscope is big -- a pill measuring 25 mm long and 10 mm in diameter. I'd have to be pretty sick to agree to swallow a pill that large. That's why, as TJ points out, there will be applications for this technology before the cost comes down.

tekochip
User Rank
Platinum
Re: Really cool, but expensive
tekochip   2/20/2014 10:40:14 AM
NO RATINGS
The Medical Device industry is an odd market place.  The volume for products is not really that high, and if you have a unique device you can pretty much charge what ever you want, and company's do (sorry patients).  
 
One of the strangest aspects to the industry is the reuse of disposable devices, like tubing sets.  It's not that big of an issue in large, industrial nations, but in smaller countries tubing sets for various procedures are sometimes reused.  Devices now try to track the tubing sets to make certain that they are not used more than once.  As the tubing sets become more expensive, because of the electronics to prevent reuse, you then start to see bootleg tubing sets of dubious quality.  Certainly worse than getting a bootleg Carolina Herrara bag.


a2
User Rank
Gold
Re: Really cool, but expensive
a2   2/20/2014 5:44:50 AM
NO RATINGS
@Elizabath: Indeed there are certain things which should consider as high priority than the cost. Health industry is one example for it. Quality plays a major role in these areas / industries and it should be focused in a much higher manner. So in such scenarios cost factor becomes secondary. 

Elizabeth M
User Rank
Blogger
Re: Really cool, but expensive
Elizabeth M   2/20/2014 4:44:34 AM
NO RATINGS
That's a good thing, Chuck, even though both you and TJ point out that sometimes the cost is worth it. I know personally I will pay a little extra for something because I do believe you get what you pay for. Health is one place where skimping wouldn't be such a great option.

Page 1/2  >  >>


Partner Zone
Latest Analysis
Some cars are more reliable than others, but even the vehicles at the bottom of this year’s Consumer Reports reliability survey are vastly better than those of 20 years ago in the key areas of powertrain and hardware, experts said this week.
While risk management sounds like one activity, in order to be conducted effectively, it must be broken down into three sub-components: risk assessment, risk monitoring, and response planning.
Many of the materials in this slideshow are resins or elastomers, plus reinforced materials, styrenics, and PLA masterbatches. Applications range from automotive and aerospace to industrial, consumer electronics and wearables, consumer goods, medical and healthcare, as well as sporting goods, and materials for protecting food and beverages.
In a speech at China's National People’s Congress in Beijing this month, Premier Li Keqiang laid out plans to revamp the country's manufacturing infrastructure with advanced technology.
While many larger companies are still reluctant to rely on wireless networks to transmit important information in industrial settings, there is an increasing acceptance rate of the newer, more robust wireless options that are now available.
More:Blogs|News
Design News Webinar Series
2/25/2015 11:00 a.m. California / 2:00 p.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
12/10/2014 8:00 a.m. California / 11:00 a.m. New York
3/31/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Mar 30 - Apr3, Getting Hands-On with Cypress’ PSoC
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  67


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service