The micro wind turbine is certainly a remarkable feat of skill, or something.
BUT the question of it recharging any portable electronics is more simply answered. If the efficiency were to be 100% then all we would need to do is find the energy that it has available in an airstream the size of the turbine blade, and determine the current that would provide at a voltage adequate to charge a battery. To make the calculations simpler we assume 100% efficiency in all of the conversions. The answer is that while it may possibly be able to charge a battery for some very low powered monitoring device, such as an outdoor temperature sender, it would be quite worthless for anything similar to a phone of any kind.
Nice try, but no prize. And please don't mislead us with false titles.
All other concerns aside, it seems like they'd be easy to contaminate or destroy with a careless touch. You'd have to filter the chunks out of air going past them, which would reduce the air velocity and raise the cost of operation, but you'd still have gaseous contaminants that could eventually cause corrosion. Perhaps the best use would be inside a sealed container with sides that move with barometric pressure change, forcing "wind" through a small orifice and past a tiny field of these. Like a watch.
Some arithmetic is called-for before deploying these. The power generated by a small patch of them might be enough to power a watch or a microprocessor in near-standby operation. But I don't think a pocketable patch of these is going to charge up a modern-day cellphone.
The company says it anticipates high-definition video for home security and other uses will be the next mature technology integrated into the IoT domain, hence the introduction of its MatrixCam devkit.
Siemens and Georgia Institute of Technology are partnering to address limitations in the current additive manufacturing design-to-production chain in an applied research project as part of the federally backed America Makes program.
Most of the new 3D printers and 3D printing technologies in this crop are breaking some boundaries, whether it's build volume-per-dollar ratios, multimaterials printing techniques, or new materials types.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.