<<  <  Page 3/3
User Rank
Biodegradable Plastic
Mydesign   12/20/2013 12:20:21 AM
1 saves
"all cars made in Germany had to have biodegradable plastics for all plastic parts. It worked out fine everywhere else, except in the engine compartment where the heat caused the wiring insulation to break down."

Bill, why it's only happened to the plastic content in engine compartment? Am not an automobile engineer, but assume that engine is the most hottest part in a car. I my car I found that radiator and nearby areas are the hottest places.

User Rank
Re: Inappropriate materials
a.saji   12/19/2013 11:04:09 PM
@naperlou: Yes that is the cycle. When there are new opportunities the existing ones do close. If not the market will be competitive. 

User Rank
Re: Inappropriate materials
naperlou   12/19/2013 2:20:52 PM
The main reason they used it was the colonial legacy.  They had plantations in southeast Asia from colonial times and still used them.  Henry Ford, in the late 1920s through the mid-1940s had rubber plantations in Brazil because the plantations in southeast Asia were closed. 

User Rank
Re: Inappropriate materials
bigpaws   12/19/2013 1:51:13 PM
Natural rubber!?  Sounds intuitively obvious that that would be a bad idea nowadays.  Hindisght and all being 20/20 so to speak.





User Rank
Re: Inappropriate materials
Turbineman   12/19/2013 10:53:34 AM
I have a 2003 Ford F350 with 24,500 miles (I don't drive it much).  Several times a year, I have to hunt down and repair/replace wires that were chewed through by rodents.  Talking to my mechanic who had just finished replacing the HP fuel pump, he explained that the insulation used by Ford in that era was regarded by the critters as strawberry short cake.  Now when it's not driven, it has several baited traps under the hood.  So far they like peanut butter better than the insulation.

User Rank
Inappropriate materials
naperlou   12/19/2013 9:17:33 AM
Bill, I grew up with small British sports cars (MG, Austin Healey, Triumph).  We often had problems with hoses and seals (among many other problems).  It turns out that the British were still using natural rubber and that it did not hold up as well as synthetic rubber.

<<  <  Page 3/3

Partner Zone
Latest Analysis
Advertised as the "Most Powerful Tablet Under $100," the Kindle Fire HD 6 was too tempting for the team at iFixit to pass up. Join us to find out if inexpensive means cheap, irreparable, or just down right economical. It's teardown time!
The first photos made with a 3D-printed telescope are here and they're not as fuzzy as you might expect. A team from the University of Sheffield beat NASA to the goal. The photos of the Moon were made with a reflecting telescope that cost the research team 100 to make (about $161 US).
At Medical Design & Manufacturing Midwest, Joe Wascow told Design News how Optimal Design prototyped a machine that captures the wing-beat of a duck.
The increased adoption of wireless technology for mission-critical applications has revved up the global market for dynamic electronic general purpose (GP) test equipment. As the link between cloud networks and devices -- smartphones, tablets, and notebooks -- results in more complex devices under test, the demand for radio frequency test equipment is starting to intensify.
Much of the research on lithium-ion batteries is focused on how to make the batteries charge more quickly and last longer than they currently do, work that would significantly improve the experience of mobile device users, as well EV and hybrid car drivers. Researchers in Singapore have come up with what seems like the best solution so far -- a battery that can recharge itself in mere minutes and has a potential lifespan of 20 years.
Design News Webinar Series
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
9/25/2014 11:00 a.m. California / 2:00 p.m. New York
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 20 - 24, How to Design & Build an Embedded Web Server: An Embedded TCP/IP Tutorial
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: 10/28-10/30 11:00 AM
Sponsored by Stratasys
Next Class: 10/28-10/30 2:00 PM
Sponsored by Gates Corporation
Next Class: 11/11-11/13 2:00 PM
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service