Ann R. Thryft
User Rank
Re: Sometimes they let go after a while.
Ann R. Thryft   11/25/2013 11:22:42 AM
I'm curious to know how they perform in humid conditions. I've had problems with these on the user end, often in consumer electronics. The peel off and separate problem has usually occurred in high humidity with various types of clear overlays, not with other tapes due to loading issues.

Greg M. Jung
User Rank
Low Surface Energy Applications
Greg M. Jung   11/23/2013 9:31:18 PM
Very good discussion about the challenges of bonding to low surface energy materials.  I appreciate the continued development of next generation adhesives to address this issue.

In addition to adhesive selection, surface texture on the component can also be modified to increase bonding ability.  In general a smoother surface will bond better than a textured surface.

William K.
User Rank
Sometimes they let go after a while.
William K.   11/22/2013 5:31:38 PM
I have had unfortunate experiences with some pressure sensitive adhesive applications. What happened is that the adhesive would initially adhere in what appeared to be a satisfactory manner, but after a few hours, or even a few days, it would peel off and separate. This was in applications with a constant loading, so there was a force tending to separate the connection. Non-pressure sensitive adhesives would function in the same application, but they are all a lot more time and effort, although often less costly.

So do the new types of adhesive solve this problem for me?

TJ McDermott
User Rank
Interesting article
TJ McDermott   11/22/2013 2:24:03 AM
Mr. Rizzo, thank you for teaching me some things I didn't know about PSAs.

Partner Zone
Latest Analysis
General Motors is putting an off-road twist on hydrogen fuel cell technology with an imposing new pickup demonstrator called the Chevrolet Colorado ZH2.
Fine powder printing of industry-standard metal and ceramic powders with a grain size of less than 10 microns is now available from industrial 3D printer maker ExOne for its Innovent printer.
At ARM TechCon 2016, CEO Simon Segars will discuss how he sees billions of devices scaling to trillions as IoT applications proliferate. We know it’s happening. How do we prepare?
The term “autopilot” is now at the heart of a growing debate between Tesla Motors Inc. and Germany’s Federal Motor Transport Authority.
A make-your-own Star Wars Sith Lightsaber hilt is heftier and better-looking than most others out there, according to its maker, Sean Charlesworth. You can 3D print it from free source files, and there's even a hardware kit available -- not free -- so you can build one just in time for Halloween.
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 10 - 14, Embedded System Design Techniques™: Getting Started Developing Professional Embedded Software
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9 | 10

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Course September 27-29:
Sponsored by 3M
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service