HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
REGISTER   |   LOGIN   |   HELP
Cabe Atwell
User Rank
Blogger
Re: Cost and IP
Cabe Atwell   1/20/2014 5:38:30 PM
NO RATINGS
Could these definitions apply to fast prototyping as well in order to get the product mass produced?

notarboca
User Rank
Gold
Re: Cost and IP
notarboca   11/30/2013 8:27:28 PM
NO RATINGS
From the article: "Next, work on clearly defining the role of the vendor in R&D, Beta start-ups, production, etc., so there is no mystification of roles."  I agree, Nancy, sometimes these definitions are either overlapped or forgotten in the grand scheme of things.

Nancy Golden
User Rank
Platinum
Re: Cost and IP
Nancy Golden   11/24/2013 6:06:45 PM
NO RATINGS
"Minimum order quantities also must be considered because many suppliers will only take on a new custom assembly when  quantities are large enough to work with their business model create a quick payback."

Very good point - When a minimum can't be met but for whatever reason, a custom assembly is required, flat fee-based services may be preferable (or even if the minimum can be met). This would eliminate the need to be concerned about who owns the IP as well. And as the article states - it is a very good idea to define the roles of all participants up front.


Greg M. Jung
User Rank
Platinum
Cost and IP
Greg M. Jung   11/16/2013 8:00:39 PM
NO RATINGS
I do agree that in many cases, partnering with a supplier to produce a custom assembly makes sense (especially in the case of motors).  However, outsourcing custom assemblies also has its own set of unique issues that must be considered.

Agreements have to be worked out up front on who will own the IP (intellectual property).  Otherwise, if the supplier owns that IP, they may continue to raise costs every year (because they know they have a monopoly on this design).  Minimum order quantities also must be considered because many suppliers will only take on a new custom assembly when  quantities are large enough to work with their business model create a quick payback.  High mix/low volume product lines do not easily lend themselves to custom assembly by suppliers.



Partner Zone
Latest Analysis
Cybathlon is an Olympic-style competition for those with bionic prosthetics.
Unlike industrial robots, which suffered a slight overall slump in 2012, service robots continue to be increasingly in demand. The majority are used for defense, such as unmanned aerial vehicles (UAVs); and agriculture, such as milking robots.
Eric Chesak created a sensor that can detect clouds, and it can also measure different sources of radiation.
Festo's BionicKangaroo combines pneumatic and electrical drive technology, plus very precise controls and condition monitoring. Like a real kangaroo, the BionicKangaroo robot harvests the kinetic energy of each takeoff and immediately uses it to power the next jump.
Practicing engineers have not heeded Yoda's words.
More:Blogs|News
Design News Webinar Series
3/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
2/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
12/18/2013 Available On Demand
11/20/2013 Available On Demand
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Apr 21 - 25, Creating & Testing Your First RTOS Application Using MQX
SEMESTERS: 1  |  2  |  3  |  4  |  5


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: April 29 - Day 1
Sponsored by maxon precision motors
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service