HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Page 1/2  >  >>
Ann R. Thryft
User Rank
Blogger
Re: Re : cheap 3D
Ann R. Thryft   11/25/2013 11:14:47 AM
NO RATINGS
3D printing is no longer a monolithic entity: it consists of many different technologies and materials, and a wide range of printers. So the costs of printing, depending on how one defines them, also range very widely, and generalizations don't really apply. The point of this particular study is that, at the low end with a cheap printer, consumers can save money making actual end-production objects.
Regarding what will or won't happen with the higher end of 3D printing, including the proportion of end-products vs prototypes, a recent study by the long-term market research firm in this area (Wohler Associates) shows that finished goods have grown from 3.9% to 28.3% of revenue in just eight years (2003 to 2012) across all 3D printing sectors. This is true for GE Aviation and other high-end manufacturers. Stay tuned.

AnandY
User Rank
Gold
Re : cheap 3D
AnandY   11/24/2013 12:20:37 PM
NO RATINGS
3D printing may be cheap in the long run but the costs of the same in the short term are prohibitively high. Very few companies can afford to use any 3D printers, let alone afford to buy the same. The costs go way beyond the costs of buying regular plastic raw materials and, as such, most companies will most likely stick to the latter for a long while to come.

Ann R. Thryft
User Rank
Blogger
Re: Wow
Ann R. Thryft   11/13/2013 11:55:35 AM
NO RATINGS
Thanks, Cadman-LT. I agree--yet another "wow" factor about this amazing technology area.

Ann R. Thryft
User Rank
Blogger
Re: Type of Process
Ann R. Thryft   11/13/2013 11:54:46 AM
NO RATINGS
Greg, the health effects of the plastics used in 3D printing is definitely a subject that's received some attention recently. But the measurements of  "green" are quite specific and don't take health effects on human users into consideration: they're usually aimed specifically at reducing energy use, and therefore carbon emissions in the environment. That requires using an entirely different set of variables and measurements from those used to measure health effects. I think it would be confusing to merge the two. OTOH, I do agree that the health effects of the materials need more attention.

Ann R. Thryft
User Rank
Blogger
Re: Saving up to $2000? Really?
Ann R. Thryft   11/13/2013 11:53:44 AM
NO RATINGS
Jim_E, I was skeptical, too about the $2,000 figure. But it's amazing a) how much plastic the average American household consumes in a year and b) how many things can now be printed at home using 3D printers because of the machines and the availabilty of online open-source .STL files, plus cheap materials. The earlier open-access article we give a link to details how the researchers arrived at that figure as the maximum.

Ann R. Thryft
User Rank
Blogger
Re: very interesting!
Ann R. Thryft   11/13/2013 11:52:34 AM
NO RATINGS
Glad you liked it, Debera. I thought the research was timely, well-conceived, thorough, and well-executed.

Greg M. Jung
User Rank
Platinum
Type of Process
Greg M. Jung   11/12/2013 9:21:22 PM
NO RATINGS
Good perspective on the energy savings benefits of 3D printing.  However, one further consideration  to evaluate when classifying a 3D printer as 'green' is which process is being used?  I may have a different definition than others, but I assume that 'green' also means less harmful or toxic to human beings.

Some 3D printers may use less energy, but certain processes use hazardous or toxic materials (which can be harmful to humans).  One 3D process that I used would cause skin allergies if the user was over-exposed due to frequent contact.  Another process caused my co-worker to have a brief case of silicosis.  I would suggest that in addition to energy consumption, that 'green' metrics also include the potential impact to the environment and to the operator's health.

Cadman-LT
User Rank
Platinum
Re: Wow
Cadman-LT   11/12/2013 12:10:21 PM
NO RATINGS
Maybe it'll be like the microwave was...eventually everyone will have one and it will be common....need a cup..print one......it's crazy! Crazy kewl!

Cadman-LT
User Rank
Platinum
Re: Wow
Cadman-LT   11/12/2013 12:06:04 PM
NO RATINGS
We have been talking about this for awhile now...3D printing....I knew this would happen, but so soon?

Cadman-LT
User Rank
Platinum
Wow
Cadman-LT   11/12/2013 12:03:52 PM
NO RATINGS
What a great article Ann. It blew me away.

Page 1/2  >  >>


Partner Zone
Latest Analysis
Because of the increasing ubiquity of wearable technology, it would be easy to think that design of wearable devices is routine and involves common design and engineering knowledge. Missed efforts in development will be remembered once the devices are used in the field
This grab-bag of new fasteners and adhesives work with a range of materials they can attach to, as well as a wide variety of applications. Several are for use in consumer applications, such as wearables or other compact electronic assemblies, and some of the adhesives have extended service temperature ranges and cure at room temperature.
Finalists have been announced for the annual Medical Design Excellence Awards (MDEAs), recognizing the best achievements in medical device design and engineering.
As governments, associations, and NGOs around the world seek to protect consumers, national and regional standards are becoming mandatory, challenging manufacturers and making testing and certification necessary for any product developed and brought to market.
No, we're not having delusions of grandeur -- this is the weapon of a Jedi Knight. And we're dying to see how it works. Today, we tear down a lightsaber.
More:Blogs|News
Design News Webinar Series
3/31/2015 11:00 a.m. California / 2:00 p.m. New York
2/25/2015 11:00 a.m. California / 2:00 p.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
5/7/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
May 4 - 8, Designing Low Power Systems using Battery and Energy Harvesting Energy Sources
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Last Archived Class
Sponsored by Proto Labs
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service