But it still puzzles me as -Was it absolutely necessary?- (I'm referring to the use or ab-use of electronics in cars nowadays). To me, the use of electronically actuated accelerators is still a case of ab-use. A much simpler and reliable Bowden cable throttle is more than enough to perform reliably. (Unless you consider the phanatic emissions-lowering brigade that pushed that kind of design onto present day cars, obviously. Another fine example of Eco-Illogical design, like lead-free solder, Compact Fluorescent Lightbulbs and other examples where overly 'green' people have caused more harm than good in the end.
BUT... That Mustang already has big enough brakes compared to many sedans.
I would not be so sure that a common midsize sedan can be safely stopped everytime in daily driven conditions in a hurry or emergency situation. And please consider some (many) replacement brake pads and rotors simply do not work as effectively as desired. Many present day replacement rotors simply warp badly in many cases and do not provide an effective braking system. Same for many pads. I'm talking real world reality. Add less than perfect shop repair results and there is some place for brake overload/failure in this scenario. A common driver that gets surprised by a lack of braking can easily overheat the brakes and crash. Another more decided driver (maybe the Roush Mustang one) will be determined enough to properly apply FULL braking on time and result in no crash. For me it is still an unresolved aspect. Amclaussen.
We have to understand that motor vehicle design, especially high end motor vehicle design, is a complex process and its hard to keep tabs on every part of the process. In addition, most of the process is automated and a simple glitch in any could have devastating effects such as the one witnessed in the 'acceleration mishap'. This is a wakeup call to designers not so keen on the minor details.
"Critic," it's time to stop trying to blame drivers for Toyota's lousy products. Time to face the fact that a jury heard expert testimony and found Toyota guilty by a "preponderance of the evidence," which is the legal terminology for the burden of proof in a civil case. The jury was obviously adamant because it went even further, stating that Toyota showed "reckless disregard" for Plaintiffs rights. Recall King Toyota has left a broad swath of destruction, featuring deaths, injuries, and at least one unjustly imprisoned Toyota driver who was finally relaesed after the facts were exposed. Talk about consumers paying a price...
The locked wheel proves that the brake system was at least partially functional.
The 150-foot skid mark proves that the driver had enough time to turn off the ignition and shift to neutral. Oh, she had enough time to apply the emergency/parking brake? Apparently she didn't know the proper procedure for stopping the car!!!
Most cars don't stop themselves- this is the driver's responsibility. Why didn't she push harder on the service brakes??? She was too weak? Maybe she should not have been driving. Maybe she had already ridden the brakes, instead of stopping the car.
Maybe there was something wrong with the car, maybe there was not. We don't know with 100% confidence. It's wrong to take one side or the other, except in a civil lawsuit, where the burden of proof is only "more likely than not."
Unfortunately, we consumers are going to pay the price for these lawsuits, regardless of what really happened.
Ratsky: Thanks for the heads up. We have friends close by who have bought & sold HYUNDAIS for the past 10+ years like most people change their socks. Not exactly sure why, since I never hear any negative comments. Maybe they just like the "experience" of buying a new vehicle every year or so.
There's a local HYUNDAI dealership in this west central FLA area that inundates the area w/ mail advertising. There isn't a week that passes that we don't receive at least one or more "SUPER SALE EVENTS of the Century", etc. Too bad there aren't laws restricting or clamping down on boasting! This dealership would win the Grand Prize every year.
Funny thing is that the old location of the TOYOTA dealer is almost directly across the highway from the HYUNDAI dealer. So, you can imagine the competition!!!
To tell you the truth, I've seen a drastic change in the attitude & daily operation of the TOYOTA dealership, and from my perspective, I can't say that I'm pleased with it. Buying a new vehicle in the coming years is going to be a scary event, I have the feeling. And, now with the vehicles becoming almost human-like in their intelligence, that scares me even more.....
One magazine, I think it was Car and Driver, did a test of this. Even a supercharged Roush Mustang, traveling at freeway speed, with sudden application of brakes and throttle came to a full stop. Their conclusion was that no ordinary car's engine, even with the car moving at freeway speed, was going to overcome its brakes.
Altair has released an update of its HyperWorks computer-aided engineering simulation suite that includes new features focusing on four key areas of product design: performance optimization, lightweight design, lead-time reduction, and new technologies.
At IMTS last week, Stratasys introduced two new multi-materials PolyJet 3D printers, plus a new UV-resistant material for its FDM production 3D printers. They can be used in making jigs and fixtures, as well as prototypes and small runs of production parts.
In a line of ultra-futuristic projects, DARPA is developing a brain microchip that will help heal the bodies and minds of soldiers. A final product is far off, but preliminary chips are already being tested.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.