HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
REGISTER   |   LOGIN   |   HELP
Page 1/2  >  >>
Elizabeth M
User Rank
Blogger
Leaner and greener
Elizabeth M   11/5/2013 8:23:59 AM
NO RATINGS
Rob, this is a really good comprehensive look at how things are changing in manufacturing on many levels as part of a real evolution happening at the moment. It's good to see more leaner processes and technologies coming into play, especially to reduce waste. So things are not only leaner but also greener, which is a very good thing!

Rob Spiegel
User Rank
Blogger
Re: Leaner and greener
Rob Spiegel   11/5/2013 8:45:58 AM
NO RATINGS
Good observation, Elizabeth. Lean is green. Almost every aspect of lean contributes to green. While the impetus is lowers costs, the result is green.

Battar
User Rank
Platinum
Re: Leaner and greener
Battar   11/5/2013 9:13:44 AM
NO RATINGS
We're going lean at our company. Greener it isn't, more a case of "how come nobody thought of that before...?". However, we are a small private comapny so we can do this. Let's see any of you get the "efficiency" word past the unions without trouble.

Elizabeth M
User Rank
Blogger
Re: Leaner and greener
Elizabeth M   11/5/2013 10:19:08 AM
NO RATINGS
Well it's good to hear your company is going leaner, Battar. I suppose it isn't always greener, but I think if you look at the big picture, any cutback on waste is probably good for the environment somehow. As you point out, it might be tougher for some unionized companies to drive efficiency, let alone be more green! But lean is a good start.

Battar
User Rank
Platinum
Re: Leaner and greener
Battar   11/5/2013 10:53:10 AM
NO RATINGS
OK, Elizabeth, I didn't spell it out in my comment, but the unavoidable truth about lean manufacturing is that I can produce the same output either in less time or with less hands (usually the former). It doesn't mean that I can significantly increase my customer base - my competitors are doing the same, so the playing field evens out.  It does mean that we have less employment to offer our workhands, and eventually it means some of them looking for a new job. So it's not all sweetness and light. Of course, it does shave a few bucks off the cost of the product. 

 

Elizabeth M
User Rank
Blogger
Re: Leaner and greener
Elizabeth M   11/6/2013 4:26:29 AM
NO RATINGS
Well thank you for that real-world perspective, Battar. There are always two sides to every story and while it's certainly a good thing to try to improve efficiency and reduce cost if possible, it's interesting to know the true effect of such efforts, and how it changes or affects how things already are done.

Rob Spiegel
User Rank
Blogger
Re: Leaner and greener
Rob Spiegel   11/6/2013 6:50:25 AM
NO RATINGS
Yes, leaner, greener and less expensive. These technology developments are making North American manufacturing more viable globally.

GTOlover
User Rank
Platinum
Re: Leaner and greener
GTOlover   11/6/2013 3:35:24 PM
NO RATINGS
Well put Battar. However, it seems the public has voted to raise the minimum wage irregardless of the impact on the cost of doing business. So once again the "Kiazan" events will start "to reduce waste". However, this time I think it will actually mean a few of the lowered skilled people will go.

My philosophy is to expand my skill base so I am never veiwed as waste!

William K.
User Rank
Platinum
Does not optimize everything!!
William K.   11/6/2013 5:35:36 PM
NO RATINGS
My one run-in with lean manufacturing and the culture that it begets was a few years back, at the Nissan plant in Arkansas. I shipped some machine parts there in preparation for installation on a machine I would be working on in another day. MY shipping instructions included a request to deliver the package of custome cables to the post coordinates of the machine that I would be working on, so that I would not need to get them from the shipping department area.

When I arrived the next day and attempted to locate the cable assemblies I found out that they had already been scrapped because they were not needed at that moment, or in the next few hours. which was a big waste of time and very expensive connectors.

I am still not impressed by that aspect of japanese lean manufacturing. It comes across as a stupid obsession with neatness and a refusal to think.

Rob Spiegel
User Rank
Blogger
Re: Does not optimize everything!!
Rob Spiegel   11/6/2013 5:48:30 PM
NO RATINGS
William K, lean manufacturing has changed quite a bit since the Japan plants used the term. Now ithe term is mostly a catch-all for efficiency improvements.

Page 1/2  >  >>


Partner Zone
Latest Analysis
These are the toys that inspired budding engineers to try out sublime designs, create miniature structures, and experiment with bizarre contraptions using sets that could be torn down and reconstructed over and over.
Connected sensor-enabled applications will improve the consumer experience -- and generate new revenue streams.
PowerStream is deploying the microgrid at its headquarters to demonstrate how people can generate and distribute their own energy and make their homes and businesses more sustainable through renewables.
Printrbot unveils its all-metal Printrbot Simple, bringing durability to low-cost 3D printers.
Today's robots should be respected, and humans should be wary of their growing skills and sophistication. Quite simply, robots are better than us in a lot of ways. Here are 10 of them.
More:Blogs|News
Design News Webinar Series
3/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
2/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
12/18/2013 Available On Demand
11/20/2013 Available On Demand
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Apr 21 - 25, Creating & Testing Your First RTOS Application Using MQX
SEMESTERS: 1  |  2  |  3  |  4  |  5


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: April 29 - Day 1
Sponsored by maxon precision motors
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service