HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
REGISTER   |   LOGIN   |   HELP
Page 1/3  >  >>
Rob Spiegel
User Rank
Blogger
Re: My opinions
Rob Spiegel   11/11/2013 1:10:47 PM
NO RATINGS
Thanks for the info and video, Jim E. I was quite improssed at PackExpo by the safety features of the robots. You could put your hand in the path of the robot and it would stop instantly. Now gearing down, jut an instant stop. Most robot producers are touting higher levels of safety.

Jim_E
User Rank
Platinum
My opinions
Jim_E   11/11/2013 10:09:04 AM
NO RATINGS
As a robot programmer with my previous company, I got to learn a bit about robotics. (Well, I still fool with them here, but only in maintenance aspects usually.)

 

The ABB FlexPicker is really amazing. Watching the youtube video of it picking up widgets off of a conveyor and putting them onto another conveyor in an endless cycle at amazingly high speed is really mesmerizing to watch.

 

The end tooling / gripper is usually one of the limiting factors in robotics use.  Some items just don't pick up well with robots.  One of the most incredible grippers to see is a "Jamming Phase Transition" gripper.  It's basically a balloon filled with coffee grounds, and the balloon can have a vacuum applied.  The gripper is placed against an item and a vacuum applied, which makes the device rigid, which conforms to what it was pressed against.  You really have to see this to believe it, and here's a video:  https://www.youtube.com/watch?v=ZKOI_lVDPpw

 

I haven't seen any industrial applications of this technology yet, but I hope it will eventually happen.

 

As for the human-safe robots, the Baxter seems more like a toy without the ability to reach pre-programmed points with accuracy.  The Universal Robotics devices seem more like industrial robots.  I played with a UR-5 at a trade-show and was impressed with it.  I tested it running into my arm and it was a bizarre to me considering that I'm used to working with giant robots which would crush me.  The reach and payload capacity of their two models aren't good enough for any of my applications yet, but I'd love to get one in my plant somehow.

Rob Spiegel
User Rank
Blogger
Re: Packing and Logistics
Rob Spiegel   11/6/2013 6:56:39 AM
NO RATINGS
Yes, MyDesign. It looks like this trend is gaining ground over recent years. This is the reason Texas Instruments gave for opening new plants in Maine and Texas.

Mydesign
User Rank
Platinum
Re: Packing and Logistics
Mydesign   11/5/2013 8:29:39 AM
NO RATINGS
1 saves
"If logistics costs play a bigger role than labor, it's natural that manufacturing moves closer to markets. A side benefit would be energy savings and environmental gains."

Rob, that's true.

Rob Spiegel
User Rank
Blogger
Re: Packing and Logistics
Rob Spiegel   10/31/2013 5:47:08 AM
NO RATINGS
MyDesign, I think robots really help in reducing the power of labor to determine everything in where stuff is built. If logistics costs play a bigger role than labor, it's natural that manufacturing moves closer to markets. A side benefit would be energy savings and environmental gains.

Mydesign
User Rank
Platinum
Re: Packing and Logistics
Mydesign   10/31/2013 3:04:06 AM
NO RATINGS
1 saves
"Thus, logistics costs may trump labor as the expense to watch -- that helps fuel the trend toward buiulding plants close to markets."

Rob, hope this Roberts can be used to reduce such expenses.

Rob Spiegel
User Rank
Blogger
Re: All the packaging robots
Rob Spiegel   10/29/2013 8:24:03 PM
NO RATINGS
Well said, far911. Robotics engineering does seem to have a bright future. And not just in packaging. Look at the robotics growth in manufacturing, medical, defense, and automotive.

Rob Spiegel
User Rank
Blogger
Re: Packing and Logistics
Rob Spiegel   10/29/2013 8:21:01 PM
NO RATINGS
Good point, Mydesign. It does look like companies are putting more emphasis on packing. And while the robots reduce the need for manual labor, they do employ engineers. They also reduce the differential between labor costs in Asia and the rest of the world. Thus, logistics costs may trump labor as the expense to watch -- that helps fuel the trend toward buiulding plants close to markets.

Rob Spiegel
User Rank
Blogger
Re: All the packaging robots
Rob Spiegel   10/29/2013 8:15:37 PM
NO RATINGS
My Design, safety was one of the selling points at Pack Expo. The servo drives and safety programs tied to individual robots seem to be an advancement in safety. The virtual light curtains and instant halt seem to be taking safety to a new level.

Rob Spiegel
User Rank
Blogger
Re: All the packaging robots
Rob Spiegel   10/29/2013 3:57:30 PM
NO RATINGS
That was exactly my impression, Chuck. The new features presented at the show were all tied to robots, whether it was motion control, drives, or the number of axes. It really was a robotics show.

Page 1/3  >  >>


Partner Zone
Latest Analysis
These are the toys that inspired budding engineers to try out sublime designs, create miniature structures, and experiment with bizarre contraptions using sets that could be torn down and reconstructed over and over.
Connected sensor-enabled applications will improve the consumer experience -- and generate new revenue streams.
PowerStream is deploying the microgrid at its headquarters to demonstrate how people can generate and distribute their own energy and make their homes and businesses more sustainable through renewables.
Printrbot unveils its all-metal Printrbot Simple, bringing durability to low-cost 3D printers.
Today's robots should be respected, and humans should be wary of their growing skills and sophistication. Quite simply, robots are better than us in a lot of ways. Here are 10 of them.
More:Blogs|News
Design News Webinar Series
3/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
2/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
12/18/2013 Available On Demand
11/20/2013 Available On Demand
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Apr 21 - 25, Creating & Testing Your First RTOS Application Using MQX
SEMESTERS: 1  |  2  |  3  |  4  |  5


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: April 29 - Day 1
Sponsored by maxon precision motors
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service