<<  <  Page 3/3
Rob Spiegel
User Rank
Re: Defining Optimization
Rob Spiegel   10/21/2013 10:00:02 AM
Greg, I would think fatigue strength would be part of the simulated optimization process. I saw a presentation by a composites testing company. They were testing on behalf of the Canadian government, and fatigue strength was part of the list of tests required. So, I would think a composites vendor -- and those using the composite -- would have to look at the long-term life of the composite.

Greg M. Jung
User Rank
Defining Optimization
Greg M. Jung   10/20/2013 7:15:32 PM
Good point Rob.  Carefully selecting the primary parameter(s) to be optimized is also important.  A development team may use simulation to optimize initial design cost and weight, when in fact fatigue strength might be the most important long term parameter to be optimized due to safety concerns.

Rob Spiegel
User Rank
Re: Simulating the future
Rob Spiegel   10/17/2013 11:44:48 PM
I look forward to the blog, Ann. For one, I'd like to know how they define optimization. As you know, it's used widely, and perhaps it's often used incorrectly.

Ann R. Thryft
User Rank
Re: Simulating the future
Ann R. Thryft   10/17/2013 12:52:01 PM
Rob, simulation is definitely step 1 in making some amazing design changes happen. But this conference I attended really focused on optimization, and for good reason. The sophisticated optimization software I saw demonstrated in videos turns out to be the secret weapon behind the ability of aerospace and automotive companies to incorporate composites in their designs. Stay tuned for a blog talking about some of these successes.

Rob Spiegel
User Rank
Simulating the future
Rob Spiegel   10/17/2013 10:39:54 AM
Nice article, Ann. Last year I attended a conference that delivered a similar message, Siemen's CAE conference. Everything was about simulation. I saw presentations about the Mars Rover landing, hybrid car development, and composites testing, all  using simulation. The reason given for this huge shift to simulation is the number-crunching power of new computers. When a calculation that used to take weeks now takes minutes, simulation becomes a much more usable tool.

<<  <  Page 3/3

Partner Zone
Latest Analysis
It's been two years since the Mac Mini's last appearance on iFixit's teardown table, but a newly revised version joins Apple's lineup this week.
More often than not, with the purchase of a sports car comes the sacrifice of any sort of utility. In other words, you can forget about a large trunk, extra seats for the kids, and more importantly driving in snowy (or inclement) weather. But what if there was a vehicle that offered the best of both worlds; great handling and practicality?
Kevin Gautier of Formlabs describes the making of a carbon fiber mold for an intake manifold, using a $3,300 3D printer, during Medical Design & Manufacturing Midwest.
Science fiction author Isaac Asimov may have the best rules for effective brainstorming and creativity. His never-before-published essay, "On Creativity," recently made it to the Web pages of MIT Technology Review.
Much has been made over the potentially dangerous flammability of lithium-ion batteries after major companies like Boeing, Sony, and Tesla have grappled with well-publicized battery fires. Researchers at Stanford University may have come up with a solution to this problem with a smart sensor for lithium-ion batteries that provides a warning if the battery is about to overheat or catch fire.
Design News Webinar Series
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
9/25/2014 11:00 a.m. California / 2:00 p.m. New York
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 20 - 24, How to Design & Build an Embedded Web Server: An Embedded TCP/IP Tutorial
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: 10/28-10/30 11:00 AM
Sponsored by Stratasys
Next Class: 10/28-10/30 2:00 PM
Sponsored by Gates Corporation
Next Class: 11/11-11/13 2:00 PM
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service