One thing about the modulation schemes. A great way to see the QAM and QPSK modulation schemes is to look at the "constellation" of the signal. This is a sort of rectangular plot that shows all the possible symbol values.
Question: Do you know of any/can you recommend some sort of simulat[or][ion] (non-HW; just for illustration) that might help develop an intuitive sense of how these various modulation schemes (/beam manipulation/etc) work? I know there are modeling packages that can probably be used for that, but, let's say I don't need that functionality (at the moment, anyway).
regarding different antenna types, there is a lot of creative work happening, particularly to enable lower correlation in small handsets and any technique is considered. polarization is one way to enable 2 streams in a small space - you need low XPR (cross polarization ratio)
Another question, is it viable to use say one antenna type, like PIFA, or printed dipole, etc, in multiple positions in a MIMO system? And must we use different polarizations in the array? Can we use only one polarization type and be successful?
Thank you -- though I, clearly, have much to go over and dig deeper into before I can be close to "owning" this material, I did appreciate the technical level of this presentation in particular. (I understand that giving us the entire context of radio comm was necessary; and likewise, I appreciate that you didn't leave anything out there, even if it was a now-waning spec.)
regarding antenna separation, that's correct - they are typically separated by a multiple of wavelengths; higher frequencies require less separation for the same correlation and that works in favor of higher MIMO capacity.
Question: it seems that 802.11 and LTE standards are settled with OFDM modulation. In your opinion, would there be a need for a new modulation scheme for even higher throughput requirements and what that modulation scheme would likely be?
Alaskaman also had a good question, that I'll add to: How do we select a separation of transmit antennae, or receive antennae, in MIMO systems? Spacing is related to wavelengths? How do we consider wavelength when the BWs are becoming wider?
re slide 19 comment - yes - high power is allowed but path loss is very high in the 60 GHz band so you need all the power you can get. For all practical purposes CMOS power amps cannot get that much power out today.
Hi all -Audio is live! If you don't see the audio bar at the top of the screen, please refresh your browser. It may take a couple tries. When you see the audio bar, hit the play button. If you experience audio interruptions and are using IE, try using FF or Chrome as your browser. Many people experience issues with IE. Also, make sure your flash player is updated with the current version. Some companies block live audio streams, so if that is the case for your company, the class will be archived on this page immediately following the class and you can listen then. People don't experience any issues with the audio for the archived version.
-The streaming audio player will appear on this web page when the show starts at 2 PM Eastern time today. Note however that some companies block live audio streams. If when the show starts you don't hear any audio, try refreshing your browser. If that doesn't work, try using Firefox or Google Chrome as your browser. Some users experience audio interruptions with IE. If that doesn't work, the class will be archived immediately following our live taping.
Earlier this year paralyzed IndyCar drive Sam Schmidt did the seemingly impossible -- opening the qualifying rounds at Indy by driving a modified Corvette C7 Stingray around the Indianapolis Motor Speedway.
Wearables are changing the way we see ourselves. With onboard sensors that have access to our bodies, we are starting to know our physical selves like never before, quantifying our activity, our heart rate, breathing, and even our muscle effort.
Last week, the bill for reforming chemical regulation, the TSCA Modernization Act of 2015, passed the House. If it or a similar bill becomes law, the effects on cost and availability of adhesives and plastics incorporating these substances are not yet clear.
This year, Design News is getting a head start on the Fourth of July celebration. In honor of our country and its legacy of engineering innovation -- in all of its forms -- we are taking you on an alphabetical tour through all 50 states to showcase interesting engineering breakthroughs and historically significant events.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.