HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
<<  <  Page 2/2
William K.
User Rank
Platinum
New servos verus no servos
William K.   9/9/2013 10:39:29 AM
NO RATINGS
Until servo systems became more reliable, more powerful, and less expensive, they simply were not as good a choice, and they were seldom cost effective. Some machines did use a lot of shafts, gears, and chain drives, but that was often because there was no other way available to keep a bunch of motions in the proper relationship. HYdraulics were often used because there was no other economical way to provide that much foce in that small a volume. 

So really, don't fault the older mechanisms, since there was not much choice.

The modern servo controllers are providing control options that did not exist before, and at power levels that were simply not available. So we do see that the new generation of servo systems does offer a way to do things thatwas not available previously. The older technologies were not a poor choice, they were the only choice. 

But the new networked servo systems, while providing a lot of benefits are also bringing along a few challenges. Systems that previously were locked into the correct sequence of motions are now able to be accidently programmed to crash and destroy themselves, and in a hurry, as well. So now the motion programmer must pay far greater attention to a lot more details, and the same goes for any who would attempt to make small changes to the programs. So there are some very real and quite serious concerns when changing from mechanical systems to interlinked servo systems.

Rob Spiegel
User Rank
Blogger
Re: Nice round-up
Rob Spiegel   9/9/2013 9:12:06 AM
NO RATINGS
Thanks for the link, Elizabeth. You're right about robots. 

Elizabeth M
User Rank
Blogger
Nice round-up
Elizabeth M   9/9/2013 5:04:09 AM
NO RATINGS
Nice round-up of the technologies that are modernizing factories, making them safer, more efficient and generally more productive. I would add robotics to the list as well, especially with efforts like Rethink Robots' Baxter (http://www.designnews.com/author.asp?section_id=1386&doc_id=263186) and more autonomous and safer robotics coming into play. Perhaps it's a little early for mass adoption but I think it will eventually trend in that direction.

<<  <  Page 2/2


Partner Zone
Latest Analysis
On Memorial Day, Americans remember the sacrifices the US armed forces have made, and continue to make, in service to the country. All of us should also consider the developments in technological capabilities and equipment over the years that contribute to the success of our military operations.
Imagine if you could train it from San Francisco to New York faster than flying?
In order to keep in line with safety protocols, industrial networks need to be filtered in a semantic way so that only information related to diagnostics is flowing back to the vendor and that any communications that could be used for remote machine operations are suppressed.
Siemens PLM has launched an online store to help customers search for, compare, and purchase partner-developed apps for its Solid Edge software.
Advanced visualization can depict an entire plant in motion, while also detailing an individual workstation. Individual products can be rendered different for each discipline involved — marketing, engineering, or suppliers.
More:Blogs|News
Design News Webinar Series
5/21/2015 11:00 a.m. California / 2:00 p.m. New York
5/7/2015 11:00 a.m. California / 2:00 p.m. New York
3/31/2015 11:00 a.m. California / 2:00 p.m. New York
6/11/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
May 18 - 22, Embedded System Design Techniques™ - Mastering the ARM Cortex-M Processor
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Course June 2nd-4th:
Sponsored by Proto Labs
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service