HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
TJ McDermott
User Rank
Blogger
Putting the electronics in harm's way
TJ McDermott   8/26/2013 1:47:08 PM
NO RATINGS
Drive-on-motor has been tried several times, and is making a resurgence again.  Depending on how the drive and motor are integrated, failure of one can be twice as costly as when the drive and motor are more traditionally separated.

Putting the drive out in a production environment invites this sort of failure.  The production environment may be extremely hot, or extremely dirty, or extremely wet.  Any of these may lead to that more costly failure.

Finally, there's the amount of space needed for the drive when piggy-backed to the motor.  Many times the space inside a machine is sufficient for the motor only (and sometimes, not even then).

 

Charles Murray
User Rank
Blogger
Re: Putting the electronics in harm's way
Charles Murray   8/26/2013 7:16:18 PM
NO RATINGS
I agree, TJ. I would guess that packaging has a lot to do with this trend.

TJ McDermott
User Rank
Blogger
Re: Putting the electronics in harm's way
TJ McDermott   8/26/2013 10:50:29 PM
NO RATINGS
Charles, if you're talking about packaging machinery, at the least on a food packaging floor, I would never touch these.

Palletizers, cartoners, maybe.  But not applications that would expose them to wash-down, water, etc.

Elizabeth M
User Rank
Blogger
Re: Putting the electronics in harm's way
Elizabeth M   8/27/2013 7:25:42 AM
NO RATINGS
That's an interesting perspective, TJ, I suppose you are right. Is there a solution to protecting the drives?

btwolfe
User Rank
Platinum
Re: Putting the electronics in harm's way
btwolfe   8/27/2013 8:50:15 AM
NO RATINGS
Protecting the drive electronics is no harder than protecting the motors. Properly designed motor controls can withstand the same harsh enviroments as the motors they control, perhaps even more so given that the electronics can be fully sealed since they have no moving parts. I would argue that the modular motor/control set is easier to replace since it has fewer connections with only power and comm, whereas a separate controller must also route sensor wiring. I have been designing and using modular motor control electronics for years and am always pleased with how clean the connectivity is in the final product.

Elizabeth M
User Rank
Blogger
Re: Putting the electronics in harm's way
Elizabeth M   9/3/2013 4:46:16 AM
NO RATINGS
Thanks for this real-world perspective, btwolfe. I think this will be important given the trend of motor and motion control in the automation environment.

Cabe Atwell
User Rank
Blogger
Re: Putting the electronics in harm's way
Cabe Atwell   10/23/2013 6:18:46 PM
NO RATINGS
Modular devices and systems are a trend that's going to continue to grow.

apresher
User Rank
Blogger
Integrated Motor Drives
apresher   8/29/2013 5:56:58 PM
NO RATINGS
Several suppliers do offer IP67 rated motor-drives, which is often the level of protection used in packaging.  Obviously the specifics of the application are vital but many of these units are finding their way into packaging capitalizing on their ability to provide distributed control.

apresher
User Rank
Blogger
Integrated Motor Drives
apresher   8/29/2013 5:58:30 PM
NO RATINGS
Elizabeth, Here is link to article I worked on earlier this year on this same topic. Interesting technology. 

Elizabeth M
User Rank
Blogger
Re: Integrated Motor Drives
Elizabeth M   9/3/2013 4:09:31 AM
NO RATINGS
Thanks for the link, Al. I will take a look at that article.



Partner Zone
Latest Analysis
2016 engineering grads can expect to earn an average salary of $65,000 right out of the gate. Petroleum engineers' wallets are much fatter, though -- they are expected to earn about $20K more.
3D printing is now adding value to manufacturers at all steps along the business value chain. Come find out how at a talk by John Jaddou at next month's Embedded Systems Conference in Minneapolis.
From IoT and M2M to flexible robotics and consumer HMI, the advances in smart manufacturing are being deployed on the packaging floor.
These new 3D-printing technologies and printers include some that are truly boundary-breaking: a sophisticated new sub-$10,000, 10-plus materials bioprinter, the first industrial-strength silicone 3D-printing service, and a clever twist on 3D printing and thermoforming for making high-quality realistic models.
Ear-based heart-rate monitoring gained momentum recently, as sensor maker Valencell Inc. announced it has licensed its biometric earpiece technology to Samsung Electronics Co. Ltd for use in so-called “hearable devices.”
More:Blogs|News
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Aug 8 - 12, Getting Hands On with Arduino Mechatronics
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9 | 10


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service