Ann, while I don't have a use for this information today, it is certainly handy to have. This source of knowledge is a resource, and like most resources becomes reallyn valuable wnen you need it, and only "interesting" the rest of the time. I can see an immediate application of this material in high frequency hiher power RF electrical applications.
What was not mentioned about the new material was outgassing, which affects the usefulness of a material for satellite and space applications, and also for semiconductor fabrication applications.
ON the issue of technical writing, DN has consistently evidenced that the deeper a technical issue is, the lesser the comments. (Case in point; this article). But I think that should be expected; -- for example, there have been several other deep articles from Guest Bloggers that I couldn't begin to comment on. The interested field of commenters just naturally narrows.
ON the subject of RIM, I was [minimally] familiar with another industrial process – Reaction Injection Molding (a different RIM) which is [loosely translated as] an injection of a 2-part epoxy. A very slow processing time because 'cure' is required. Checking my old faithful resource, Wikipedia doesn't have a page for your definition of RIM but does link it to your other suggested process, Resin Transfer (RTM).
Always interesting to learn about new things – Thanks!
Wow, thanks, Jim. I wasn't sure if readers wanted something this technical, but many discussions like this one just don't reduce down. RTM and RIM are standard processes that have been around awhile but not for high-performance materials like this one.
Are they robots or androids? We're not exactly sure. Each talking, gesturing Geminoid looks exactly like a real individual, starting with their creator, professor Hiroshi Ishiguro of Osaka University in Japan.
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This discussion will examine what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.