This articel sounds like the cubic inch battles of the 60s.(Watch the disney movie Dumbo from the 40s and watch the drunk clown scene.) Sunco was kept in business since the Covettes required the 260 blend . . . . I lost count of the volatge on thedifferent cars. This means that battery makers cannot standardize. I'd like discussion on the safety factor. I have hears or the Pintos w/ fork truck batteriies having a short and the entire car tourched in seconds from a short(wrench dropped). Are we going to wait until one death from these vehicle w/ no concern to isolate the power from the rest of the vehicle? With this much electrical power they may be the next vehicle of choise for terrorists. Just like bigger planes became bombs on 9-11. Less weight. Less power. More safety.
Essentially, Rob, you're asking how much more all-electric range can you get by employing a higher-voltage architecture? Higher-voltage architectures and higher-voltage batteries are in general better at capturing regenerative braking energy, which does get you some extra electric range. But putting a number on it is going to be tough. I'll try to get a rough estimate for you, but it will vary from vehicle to vehicle, since they have different electrical architectures. Great question.
The voltages noted in the article match the DC bus voltage one would find in an industrial Variable Frequency Drive. Using just the converter portion of such a drive would permit the use of regular 220V AC motors on the 300-360 voltages, and 460V AC motors for those in the 650V bus range.
Cap'n, this is an interesting trend. The 48V systems are an interesting bridge. As more functions are powered by electricity provided by batteries, the load on the engine is lessened. This allows smaller (more fuel efficient) engines to power the vehicle. Charging the batteries using regenerative braking captures energy that was unused before. Thanks for the article.
Using a 3D printer, CNC router, and existing powertrain components, a team of engineers is building an electric car from scratch on the floor of the International Manufacturing Technology Show in Chicago this week.
In November, a European space probe will try to land on the surface of a comet moving at about 84,000 mph and rotating with a period of 12.7 hours. Many factors make positioning the probe for the landing an engineering challenge.
NinjaFlex flexible 3D printing filament made from thermoplastic elastomers is available in a growing assortment of colors, most recently gold and silver. It's flexible and harder than you'd expect: around 85A (Shore A).
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.