Ann--I agree with Charles--How on earth did you find this story?????? Very interesting. I was under the impression 3-D printing had to use a single material source. I was obviously incorrect about this one. The capability of the printer pushes the envelope for this technology. We can certainly add this product to our list of possibilities for "additative" manufacturing with this story.
Proper sound reproduction, even in 2013, is still far far away from really satisfactory. But looking at this design, at least the designer DID some steps in the right direction: He's used a close to spherical enclosure. For the information of the un-initiated, back in October 1950, Harry F. Olson wrote an extraordinary paper in the AES (Audio Engineering Society) that is still being neglected by too many present day audio "geniuses" that presume the use of computers: the best shape (by far) for a direct radiating loudspeaker enclosure IS an spherical one! This truth has been ignored for many years. For a look on the (undesirable) effects of non spherical enclosures, you can find the paper and its graphs at:http://www.dwdrums.com/images/moonmic/olson_direct-radiator-loudspeaker-enclosures.pdf
Why do designers insist on using rectangular shaped boxes for 99.9% of all commercially available speakers? Because it is much easier to fabricate and place in bookshelfs and people has become familiar to see that shape. On the other side, pretending to fabricate the diaphragm and other critical parts in a 3D printer would throw away the acceptably good results that high quality conventional drivers (speakers) have today. And the article says the enclosure was made by "turning it from glass"??? (unless the glass was "blown", a conventional lathe could not possibly turn a chunk of glass... Amclaussen.
rungun, "body parts" can mean several things, but an organ is definitely one of them. The 3D printed kidney mentioned in the article--which was printed during a TED talk using living cells--is not yet working, but the same institution--Wake Forest Institute for Regenerative Medicine--has developed its own modified 3D printer to produce organ and tissue prototypes. Here's the TED talk link: http://www.ted.com/talks/anthony_atala_printing_a_human_kidney.html Here are some links from the Institute: http://www.wakehealth.edu/Research/WFIRM/Our-Story/Inside-the-Lab/Bioprinting.htm http://www.wakehealth.edu/Research/WFIRM/Projects/Replacement-Organs-and-Tissue.htm And stay tuned about 3D printed bone replacements--a blog is coming soon.
@Ann: Again body parts are being printed is not correct.
1. For the tissues, you start with a small culture of the patient cells, give it a scaffolding and nutrients to grow (scaffolding is 3D printed in shape).
2. For dental and bone replacements, 3D print of mould is being done and then different materials are cast/formed in the moulds.
3. In the current technology as far as I know, there is no material that be 3D printed directly as replacement because of strength concerns. For example 3D printing a broken part of the bone sounds great, but current material do not have the "engineering properties" needed for the bone.
4. As I said many times we move an inch and we forecast that we can move a mile. And then very soon without any progress we claim that the new technology has moved a mile....
Thanks, Chuck. I'm not sure a price comparison can be made so easily, or if anyone's done that. This speaker was printed on a very high-end printer that costs several thousand dollars. To answer your other question: I don't remember, but I read and scan an enormous amount of stuff every day.
Like Greg, I'm also interested in finding out how well these speakers transmit sound. The designer says he worked with an audio engineer, but that doesn't say anything about the musical sensitivity of designer or engineer.
If you have some familiarity, perhaps you can answer this:
I used to work for a company that does outdoor LED signs. Like every other company in this business, they purchase the LED's from China.
I was wondering if we could 3D print the LED's on the circuit boards and actually manufacture the LED tiles to order. I did a little research, and it did seem possible (but maybe not cost effective). Do you know if it is?
Thanks for your response and at least I know someone else who shares my main point.
I have read about growing tissues with a 3D print scaffold as a support structure, but that is not the same as printing replacement tissues. (I heard enough of people who come up to me and say 3D printers can print tissues and they believe that a doctor can print tissues, organs etc and do the surgery and send you back home....
Like many other technologies that have come and gone, I am unable to predict how far this will go. I think on of the major issues will be what loads, stresses and strains the finished product can handle.
I used 3D printing first in 1992 and I am excited for the technology and am using it now too, but I am not a friend of the hoopla around it.
The first Tacoma Narrows Bridge was a Washington State suspension bridge that opened in 1940 and spanned the Tacoma Narrows strait of Puget Sound between Tacoma and the Kitsap Peninsula. It opened to traffic on July 1, 1940, and dramatically collapsed into Puget Sound on November 7, just four months after it opened.
Noting that we now live in an era of “confusion and ill-conceived stuff,” Ammunition design studio founder Robert Brunner, speaking at Gigaom Roadmap, said that by adding connectivity to everything and its mother, we aren't necessarily doing ourselves any favors, with many ‘things’ just fine in their unconnected state.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.