HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
bobjengr
User Rank
Platinum
AMERICAN MANUFACTURING
bobjengr   7/19/2013 10:39:43 AM
NO RATINGS
Excellent post Michelle.  I retired from a GE company; i.e. Roper Corporation, Inc and I can state, at one time, all engineers and purchasing people had as a mandate, to specify and purchase 30% of all components from LCCs (low cost countries).  We all felt this was a real bummer and limited our choices considerably.  As you mentioned in your post, the tide is turning.  There are other reasons for this, namely:

1.) Quality for "commodity" components drops considerably after first piece inspections are performed. It is a MUST that incoming inspections be performed to "cull out" off-quality merchandise.

2.) Communications, no matter what anyone tells you, is an ongoing problem.

3.) The speed at which product and component revision can be made is definitely lessened due to "products on the water".  It is very difficult to achieve the number of turns on inventory without creating obsolescence.

4.)  Geopolitical issues and instability. (Depending upon the product, there are definitely issues with national security.  )

5.)  I do suspect vendors in China can count even though it is not uncommon to order 10 and get 8.  This is an ongoing problem also. 

In my opinion, if we had a government that would keep out of our way, manufacturing could once again be the cornerstone of an economic rebound in this country.  This can be accomplished with good environmental policies in place in spite of what you hear.  Again--excellent post.

Ann R. Thryft
User Rank
Blogger
Re: Integrating engineering and manufacturing
Ann R. Thryft   7/18/2013 1:46:52 PM
NO RATINGS
Thanks for the information. I found it especially interesting to read about gaps in communication between American design engineers and Chinese manufacturers. Perhaps that gap, and the problems it causes, are behind so many of the problematic products we've discussed in comments to many Made by Monkeys and Sherlock Ohms columns. Like Lou, I also remember TQM.

TJ McDermott
User Rank
Blogger
Geospring made offshore first?
TJ McDermott   7/18/2013 12:50:29 AM
NO RATINGS
Michelle, I'm confused about the sequence of events concerning the Geospring.  Your article states GE brought it back to the US.  I took this to mean it WAS being manufactured in China.

If the US fabricators thought the tubing at the top was such a mess, how did the Chinese fabricators make it?

 

naperlou
User Rank
Blogger
Integrating engineering and manufacturing
naperlou   7/17/2013 11:50:25 AM
NO RATINGS
I really like the GE water heater example.  I am old enough to have gone through the TQM types of programs where the whole team was brought together, including engineering, manufacturing and field engineering.  At one company I was assigned a field engineer to do programming.  The idea was that, since he was involved in the development of the product, he would be better placed to install, upgrade and maintain it.  He also provided valuable information about what we were doing and helped us avoid designs that would be hard to maintain. 

 

Then things went offshore.  Companies lost control.  I have worked over the last few years on companies that were going out of business becuase of mistakes made by foreign suppliers.  These were small companies.  Few could be saved.  What I found interesting, though, was that one of my small company situations was exactly similar to a large company in the same basic business.

 

As for efficiency in China, just look at Foxconn.  I have heard that they have 1.2M workers.  What!! Does anyone think that this is efficient?  I am not worried. 

 

One other thing.  Those low end industries that the US "gave up" were in some cases where we were the biggest exporters (e.g., textiles).  We gave those industries up for geopolitical reasons.  In fact, that is why most of our industrial issues have arrisen. 

 

If you look at manufacturing in the US, much of it is owned my foreign companies.  Many German and Japanese companies manufacture here.  And their presence is growing. 

Rob Spiegel
User Rank
Blogger
Energy benefit hasn't hit yet
Rob Spiegel   7/17/2013 10:19:12 AM
NO RATINGS
Nice article, Michelle. You hit on all of the points that are enhancing U.S. manufacturing. You mentioned lower energy costs due to shale oil. That part hasn't hit yet. While new oil is coming onto the market from fracking, it hasn't hit the volume needed to drive down energy costs, which are still set by world demand. But it will. Right now the energy savings seen at plants has to do with efficiency. Over the next few years, new oil and new natural gas from fracking will begin to make a difference in the cost of energy. But it hasn't hit yet. When it happens, you'll see the effect at the pump.



Partner Zone
Latest Analysis
From home enthusiasts to workers on the manufacturing floor, everyone's imagination is captured by the potential of 3D printing. Prototyping, spare parts creation, art delivery, human organ creation, and even mass product production are all being targeted as current and potential uses for the technology.
ABI Research, a firm based in the UK that specializes in analyzing global connectivity and other emerging technologies, estimates there will be 40.9 billion active wirelessly interconnected “things” by 2020. The driving force is the usual suspect: the Internet of Things.
Just in time for Earth Day, chemicals leader Bayer MaterialScience reported from the UTECH Europe 2015 polyurethane show on programs and applications using its materials to help reduce energy usage. The company also gave an update on its CO2-based PU as that eco-friendly material comes closer to production.
Solar and wind energy are becoming more viable as a source of energy on the electric grid. For decades, the major drawback to solar and wind was that they’re temperamental. A cloudy day kills solar and a still day renders the wind turbines useless. Automation tools, however, are providing a path to help these renewables become practical.
In honor of Earth Day, the National Security Agency has launched the STEM Recycling Challenge in Maryland schools to encourage kids to think about where the garbage they throw out every day actually goes. The agency has also introduced “Dunk,” a muscular blue cartoon recycling bin wearing shorts and sneakers.
More:Blogs|News
Design News Webinar Series
3/31/2015 11:00 a.m. California / 2:00 p.m. New York
2/25/2015 11:00 a.m. California / 2:00 p.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
5/7/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Apr 20 - 24, Taking the Internet of Things to the Cloud
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Last Archived Class
Sponsored by Proto Labs
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service