HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Comments
You must login to participate in this chat. Please login.

Are there any other questions that i can answer for anybody.

You can contact me directly at tony.holtz@protolabs.com or visit our website at protolabs.com

Thank you!

Blogger

I know general rule is to maintain same thickness through part, but can you comment on tricks or techniques to deal with varying thickness within a mold, or what % thickness difference can a part handle without causing issues?

I recommend a 50-60% wall thickness of adjacent walls for a good designed injection molded part.

Blogger

Best place to buy molds in the world?

 

Depends on if you are interested in purchasing a mold or to purchase parts.  It is difficult to say who is the best, a lot has to be considered if you are looking for low/high volume of parts.  How does speed determine you schedule.

If you are looking for real parts fast that are functional, and in the materials you plan on using for production...Then Proto Labs is a great place to look at for getting your parts.

Blogger

What are the 2-3 basic rules to designing a plastic part?

Uniform Wall Thickness

Appropriate Draft

Material Selection

Blogger

Sorry for the tecnical difficulty.  Thank you for listening in to the interview.

Blogger

Thanks everyone for staying with us through the thechinical dificulty..

Iron

I know general rule is to maintain same thickness through part, but can you comment on tricks or techniques to deal with varying thickness within a mold, or what % thickness difference can a part handle without causing issues?

Iron

We have had some techinical difficulties we are trying to get our speakers back.

 

Iron

Best place to buy molds in the world?

Iron

Thanks for joining us today! Please feel free to post your questions at anytime during the show..

Iron

What are the 2-3 basic rules to designing a plastic part?

Iron


Partner Zone
Latest Analysis
Advertised as the "Most Powerful Tablet Under $100," the Kindle Fire HD 6 was too tempting for the team at iFixit to pass up. Join us to find out if inexpensive means cheap, irreparable, or just down right economical. It's teardown time!
The first photos made with a 3D-printed telescope are here and they're not as fuzzy as you might expect. A team from the University of Sheffield beat NASA to the goal. The photos of the Moon were made with a reflecting telescope that cost the research team 100 to make (about $161 US).
At Medical Design & Manufacturing Midwest, Joe Wascow told Design News how Optimal Design prototyped a machine that captures the wing-beat of a duck.
The increased adoption of wireless technology for mission-critical applications has revved up the global market for dynamic electronic general purpose (GP) test equipment. As the link between cloud networks and devices -- smartphones, tablets, and notebooks -- results in more complex devices under test, the demand for radio frequency test equipment is starting to intensify.
Much of the research on lithium-ion batteries is focused on how to make the batteries charge more quickly and last longer than they currently do, work that would significantly improve the experience of mobile device users, as well EV and hybrid car drivers. Researchers in Singapore have come up with what seems like the best solution so far -- a battery that can recharge itself in mere minutes and has a potential lifespan of 20 years.
More:Blogs|News
Design News Webinar Series
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
9/25/2014 11:00 a.m. California / 2:00 p.m. New York
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 20 - 24, How to Design & Build an Embedded Web Server: An Embedded TCP/IP Tutorial
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: 10/28-10/30 11:00 AM
Sponsored by Stratasys
Next Class: 10/28-10/30 2:00 PM
Sponsored by Gates Corporation
Next Class: 11/11-11/13 2:00 PM
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service