The quality of the help in these quicky lubes can be a nightmare. I took my Ranchero into one of those along with 6 quarts of mobil 1. They drained the oil and then refilled forgetting to replace the drain plug. All of my oil in the pit. The manager offered to only charge me half price. Unbelievable! Of course I never went back.
Reminded me of my friend. He took his car in to one of those oil change places. The guy didn't put the filter on correctly. Let's just say he didn't make it too far before things went bad. I guess when you do something like that(the checking of the oil as well) so many many times you might get a bit careless.
They kept going so long that the bodies started falling apart while the engine was still intact. We were living near the ocean then, so the salt air probably was instrumental in that car's demise. But the engine still ran!
You're right, Rob, this was back when most cars in the US were bigger and most mechanics were used to working on them. I had a boyfriend with a Dodge Dart--I remember all that room under the hood. Sure made it easier to find things.
Good to see another 'straight 4' going back into service! I've got mine re-seated, re-you-name-it, and heading back into a '72 Volvo 1800ES. Good on you getting the 544 spruced up, I'll buy the coffee when we meet on the road-
Ann, you machanic waqs probably used to the large American cars with plenty of room under the hood. I once owned a Doge Dart from the 1970s. You could almost stand in the engine compartment -- there was so much room. With the smaller cars, everything was crammed together. Now when you look under the hood, not only is it compact, it's hard to know what you're looking at.
The company says it anticipates high-definition video for home security and other uses will be the next mature technology integrated into the IoT domain, hence the introduction of its MatrixCam devkit.
Siemens and Georgia Institute of Technology are partnering to address limitations in the current additive manufacturing design-to-production chain in an applied research project as part of the federally backed America Makes program.
Most of the new 3D printers and 3D printing technologies in this crop are breaking some boundaries, whether it's build volume-per-dollar ratios, multimaterials printing techniques, or new materials types.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.