HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
<<  <  Page 2/3  >  >>
vimalkumarp
User Rank
Gold
outsourcing in medical manufactuiring
vimalkumarp   7/11/2013 1:26:33 AM
NO RATINGS
Most EMS companies have better manufacturing and in-house resources and domain knowledge for low to mid-volume and high-mix manufacturing in comparison to medical OEMs is a great point. Being a medical device design consultant from India, i have  workd with many medical device giants and i have seen this shift towards outsourcing in medical manufacturing.

Ann R. Thryft
User Rank
Blogger
Re: Medical yes, military no
Ann R. Thryft   7/3/2013 12:43:16 PM
NO RATINGS
Rob, there does seem to be confusion on what happened and the terms involved. COTS generally refers to commercial OTS component hardware (defined by its functions, manufacturers, availability and pricing), and sometimes the board-level products made with them (in addition to open-platform software). It's not a very precise term, but it basically means "not custom" and "not proprietary," and usually "open platform." Of course, the extent of customization actually depends on what level of value-add has occurred at any given point and who's selling to whom along the supply chain.
To say that one of these boards, or even components, is no longer COTS because it's leaded vs lead-free, doesn't make much sense if it's still an Intel processor, for example. That terminology usage might be technically true but unnecessarily confusing and not useful. Only some types of components needed to retain lead solder for military performance reasons, and at this late date, I don't remember which ones. Some suppliers did, indeed, stop making leaded components. Again, all of my knowledge is about 5 years old.

Rob Spiegel
User Rank
Blogger
Re: Medical yes, military no
Rob Spiegel   7/2/2013 3:16:47 PM
NO RATINGS
Ann, not sure we're using the same terms. Or maybe I'm mixed up. I thought that when suppliers started making a separate line of components with lead for the military, they were no longer considered COTS, since the commercial off the shelf components were now lead-free. Thus what used to be COTS was now something between mil spec and COTS. And didn't a lot of those suppliers simply quit making leaded versions of their components?

Ann R. Thryft
User Rank
Blogger
Re: Medical yes, military no
Ann R. Thryft   6/28/2013 12:03:23 PM
NO RATINGS
I'm not sure which military hardware you're describing. The military was still using a lot of COTS stuff, at least for soldiers, five years ago when I covered that field. The lead-free issue had been a big deal but mil suppliers were making separate, lead-full mil product lines since mil products were exempted from the restrictions. Other mil suppliers that also sold to commercial customers ran two lines, one for each market, with the understanding that they'd try to move over to lead-free if/when the statute of limitations ran out on that exemption. It was also to give them time to deal with the performance issues of lead-free. But that was still all COTS, since COTS are necessary due to costs.

Rob Spiegel
User Rank
Blogger
Re: Medical yes, military no
Rob Spiegel   6/27/2013 11:26:52 PM
NO RATINGS
With the shift to lead-free components, a couple industries -- medical and defense -- moved away from COTS (which are now lead-free) and started using components from smaller -- and more expensie -- runs of leaded parts. With many products needing to last 20 years or more, those industries were not ready to trust the new lead-free components.

Ann R. Thryft
User Rank
Blogger
Re: Outsourced to Europe and North America
Ann R. Thryft   6/27/2013 4:16:06 PM
NO RATINGS
Thanks for the specifics, Rob. I was about to post that question.

Rob Spiegel
User Rank
Blogger
Re: Outsourced to Europe and North America
Rob Spiegel   6/26/2013 7:12:11 PM
NO RATINGS
Yes, it is good news, Jim. I don't think cell phone manufacturing will come back anytime soon, but some stuff is staying and some stuff is coming back.

It seems to be a confluence of changes. China's labor is increasing -- helped in part by the Chinese government encouraging the formation of labor unions is factories building U.S. and European goods (but not for goods aimed at the Chinese market). Logistics hurts -- thus there's a trend to build near your market. U.S. executives are getting tired of staying up all night talking with their Chinese manufacturer. They'd rather do their telephone ranting in a U.S. time zone. Quality is an issue, as is intellectual property.

Ann R. Thryft
User Rank
Blogger
Re: Medical yes, military no
Ann R. Thryft   6/26/2013 5:54:12 PM
NO RATINGS
Thanks for that definition, Jim. I remembered it, but only vaguely and not the ITAR name. And you are right about the distinction between the terms "outsourcing" and "offshoring."

JimT@Future-Product-Innovations
User Rank
Blogger
Re: Outsourced to Europe and North America
JimT@Future-Product-Innovations   6/26/2013 4:46:08 PM
NO RATINGS
After the outsourcing explosion that detonated in 2000, and after living thru the deteriorating US manufactures' gloomy dilemma's, I didn't realize that pendulum had swung back all the way, as of this year.  – It's very good news for American Jobs.  Outsourcing does not have to mean "Off-Shore".

JimT@Future-Product-Innovations
User Rank
Blogger
Re: Medical yes, military no
JimT@Future-Product-Innovations   6/26/2013 4:40:28 PM
NO RATINGS
The US State Department, cooperating with the US Commerce Department regulates all Military classified projects as 'ITAR' – International Traffic in Arms Regulations.  If a company is developing a product internally (long before its commercial launch), their product is pre-classified either as ITAR or non ITAR, based on voluntary internal auditing and compliance.

If a program is deemed to be ITAR, the State Department strictly requires that all design, manufacturing, and any involvement on any component whatsoever, be completed by a US Citizen in a US facility on US soil.  Not even a Canadian in Iowa (for example), is allowable to work in any capacity under ITAR regulations.  Nor could any American design so much as a custom switch-cover in Hong-Kong.

Absolutely zero tolerance for any non-US-citizen to even see so much as a marketing brochure.

<<  <  Page 2/3  >  >>


Partner Zone
Latest Analysis
The first Tacoma Narrows Bridge was a Washington State suspension bridge that opened in 1940 and spanned the Tacoma Narrows strait of Puget Sound between Tacoma and the Kitsap Peninsula. It opened to traffic on July 1, 1940, and dramatically collapsed into Puget Sound on November 7, just four months after it opened.
Noting that we now live in an era of “confusion and ill-conceived stuff,” Ammunition design studio founder Robert Brunner, speaking at Gigaom Roadmap, said that by adding connectivity to everything and its mother, we aren't necessarily doing ourselves any favors, with many ‘things’ just fine in their unconnected state.
When my daughter decided she wanted to study engineering, I was very proud of her. At the same time, in the back of my mind, I wondered if she knew what she was in for.
AutoDesk has teamed up with 3D scanner provider Artec to link CAD software and 3D scanners to make it faster and easier to create accurate 3D mesh models for printing or digital use.
Last year you helped Design News and Allied Electronics crown its first-ever Gadget Freak of the Year, and we need your help again. Vote in round 2 of our second-annual contest.
More:Blogs|News
Design News Webinar Series
11/19/2014 11:00 a.m. California / 2:00 p.m. New York
11/6/2014 11:00 a.m. California / 2:00 p.m. New York
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Dec 1 - 5, An Introduction to Embedded Software Architecture and Design
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Last Archived Class
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service