notarboca, I'd be very surprised if Airbus *didn't* do the type of tests you mention. The 15 slides shown in my previous story on the 350, "Slideshow: Anatomy of a Composite-Heavy Jetliner" http://www.designnews.com/author.asp?section_id=1392&doc_id=264009 are a mere smattering of all the various press releases and announcements made on the many, many steps during this entire process, and many of those represent a ton of different tests. Commercial aircraft must go through a very rigorous testing process, much more extensive than that of military aircraft. We've discussed this, regarding composites, here: http://www.designnews.com/document.asp?doc_id=235863 and here: http://www.designnews.com/author.asp?section_id=1386&doc_id=235214 Airbus seems to have learned from Boeing's mistakes.
Ann, TJ-- I, too, would like to see composite fatigue results. Fatigue kills airframe components! The only way the US Air Force has been able to keep B-52s airworthy is to address this, since the wing flexes about 6 feet with every takeoff and landing cycle. Quite a maintenence effort.
I doubt Airbus has taken a horizontal stablizer into a test bed and twisted/jerked it six ways from Sunday to see fatigue results. Most probably rely on computer modelling, but I hope not.
@Murray: Yes sounds like that to me too. You need to provide the fullest support towards industries like aviation since they are the things which carries the industry forward if its right on track with technology.
Yes, I saw that poll. That's the power of bad press. The fact that this is old tech, not new tech, at fault makes me nervous, because that indicates a systemic problem, like one of QA/maintenance. If anything, you'd think those oversight-type systems would be tightened on the 787 by now, not loosened.
Thanks, Rob. So now it's a brake indicator problem--not exactly new technology. At least the most recent problems have been mechanical, and not related to new technologies. OTOH, one wonders why they happened at all.
Altair has released an update of its HyperWorks computer-aided engineering simulation suite that includes new features focusing on four key areas of product design: performance optimization, lightweight design, lead-time reduction, and new technologies.
At IMTS last week, Stratasys introduced two new multi-materials PolyJet 3D printers, plus a new UV-resistant material for its FDM production 3D printers. They can be used in making jigs and fixtures, as well as prototypes and small runs of production parts.
In a line of ultra-futuristic projects, DARPA is developing a brain microchip that will help heal the bodies and minds of soldiers. A final product is far off, but preliminary chips are already being tested.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.