Putting it in perspective, thats 9 kW on a 'normal' road while the 600 Hp engine is rarely taxed to 100% and doing much less when cruising. These days with fuel costs punishing truckers its never an either/or decision. Note the second value is improved ride thanks to a more complex hydraulic circuit.
Looking past the confusion over power and energy, 1KW of Power is approximately 1-1/3 HP. So, if a large truck shocks would somehow continually generate 1KW of power, that would equate to about 9HP (based on 6 shocks).
A typical truck would have an engine that produces in the vicinity of 600HP. So, even if the shocks put out 9HP continuously (which they would not, unless the road was continuously bumpy), it would amount to about 1.5% of the power of the engine.
According to one source, new style tires can improve the efficiency of a truck by 7%. Keep your shocks, I'll take the tires.
I agree. This article is very informative and the technology topic is quite relevant. Using the vehicle's mechanics to create energy seems a no brainer. I can see Car Alternator manufacturers becoming disgruntle because of the potential to replace their product with this new energy harvesting based shock absorber. Very interesting article indeed.
Thanks Elizebeth for such an informative post , what i beleive is that the bumps experienced by the cars produces voltage and when that voltage is stored in the passenger car produces 100 to 400 Watts however in heavy truckss results in 1KW of energy and that energy is then used to chaarge the batteries of the car .
Just to clarify something very basic. 1KW is not energy, it is power. If something produces a 1KW pulse of very short duration, it could be an accurate statement to say that the device produced 1KW of "power", but the amount of energy is the product of power and time. For short duration pulses of 1KW, the amount of energy may be miniscule.
So, perhaps these devices produce impulses of 1KW. What is the duration and frequency of them? Is the amount of energy produced meaningful?
If the energy is going to be expressed in terms of watts, a time unit must be involved, such as KWH. Killowatt Hours is a unit of energy. If they state the energy in terms of killowatt hours, it would be more meaningful. It is not meaningful to produce power pulses of 1KW if they are not sustained. On a smooth road, the shocks would not produce sustained power, because they would not be moving on a smooth road.
The terms power and energy should not be used interchangeably. They are not the same thing. Saying that a shock is 1KW is a very deceptive. I want to know how many KWH the thing produces per unit of time, not how much peak power it can produce.
Yes, if there's one big thing that the 54.5-mpg mandate has done, it's been to push the state of the art in internal combustion engines. It's amazing how many press releases I've seen about more efficient engines in the past 12 months,
Again, I can't say for sure, but I've been hearing that figure for years. I believe it is based on a huge percentage (maybe 60-65%) of the engine's energy being lost as waste heat and friction. The biggest innovation would be to figure out how that waste heat could be harvested.
What should be the perception of a product’s real-world performance with regard to the published spec sheet? While it is easy to assume that the product will operate according to spec, what variables should be considered, and is that a designer obligation or a customer responsibility? Or both?
Biomimicry has already found its way into the development of robots and new materials, with researchers studying animals and nature to come up with new innovations. Now thanks to researchers in Boston, biomimicry could even inform the future of electrical networks for next-generation displays.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.