You will find switched-capacitor filters (SCFs) in audio circuits, in anti-aliasing filters, and in tracking filters. The latter type of filter can track a signal by adjusting the filter's clock frequency to "tune" filter characteristics as a sampled signal changes frequency. You also can use SCFs in tone-detection circuits. Unlike a PLL circuit that requires external passive components (and trimming) to detect a tone, an SCF requires only a clock signal. SCFs also serve as notch filters.
Because the filtering occurs based on a "master" clock signal's frequency, you might consider an SCF is you want to scan a given bandwidth to obtain information within it at certain frequencies. The SCFs would act like the front end of a spectrum analyzer.
So, for an SCF, the frequency response depends solely on the ratio of two capacitors, C and C1, and the switching-clock frequency, fclk.
@Jon, thanks for the very informative post. Capacitor ratios can take advantage of the superior matching of capacitances fabricated on silicon. Especially in monolithic form capacitor ratios are very robust against changes in temperature.
Using wireless chips and accessories, engineers can now extract data from the unlikeliest of places -- pumps, motors, bridges, conveyors, refineries, cooling towers, parking garages, down-hole drills and just about anything else that can benefit from monitoring.
With strong marketplace demand for qualified engineers across the board that currently outstrips the available supply, there may never be a better time for engineers and project managers to advance their careers and salaries. Whether those moves are successful in the short-term and long-term is likely to depend on how the transition from one job to the next is handled.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.