So, for an SCF, the frequency response depends solely on the ratio of two capacitors, C and C1, and the switching-clock frequency, fclk.
@Jon, thanks for the very informative post. Capacitor ratios can take advantage of the superior matching of capacitances fabricated on silicon. Especially in monolithic form capacitor ratios are very robust against changes in temperature.
You will find switched-capacitor filters (SCFs) in audio circuits, in anti-aliasing filters, and in tracking filters. The latter type of filter can track a signal by adjusting the filter's clock frequency to "tune" filter characteristics as a sampled signal changes frequency. You also can use SCFs in tone-detection circuits. Unlike a PLL circuit that requires external passive components (and trimming) to detect a tone, an SCF requires only a clock signal. SCFs also serve as notch filters.
Because the filtering occurs based on a "master" clock signal's frequency, you might consider an SCF is you want to scan a given bandwidth to obtain information within it at certain frequencies. The SCFs would act like the front end of a spectrum analyzer.
Industrial trade shows, like Design News' upcoming Pacific Design & Manufacturing, deserve proper planning in order to truly get the most out of them as marketing tools. Here's how to plan effectively.
The series now can interface with a wider array of EtherNet/IP-compliant hardware across many industrial sectors, including factory automation systems, plastic injection molding apparatus, and materials-handling equipment.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.