HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Page 1/2  >  >>
Nancy Golden
User Rank
Platinum
Possibilities are Mind Boggling
Nancy Golden   5/23/2013 10:49:30 AM
NO RATINGS
Fascinating article, Cabe - thanks for the peek at some amazing technology. Both applications are so exciting and the possibilities are mind boggling. How cool it would be to prototype designs digitally - just print it out! I see a lot of articles about 3D printing on here but have never seen a 3D printer myself - how accessible is it becoming for the average engineer and what skill sets are needed to utilize one?

mrdon
User Rank
Gold
Re: Possibilities are Mind Boggling
mrdon   5/23/2013 12:05:55 PM
NO RATINGS
Nancy,

I agree. The article was very interesting. The solutions that 3D printers are solving are mind boggling and shows the spirit of human innovation at its finest. The video of the 3D printed rocket engine was very impressive. I believe using a 3D printer is not difficult because of the machine's ease of use, the online support from folks like Makerbot, and the free CAD software and files being shared by the online community of Makers. Nice article Cabe!

Nancy Golden
User Rank
Platinum
Re: Possibilities are Mind Boggling
Nancy Golden   5/23/2013 12:11:27 PM
NO RATINGS
Not to be skeptical mrdon, but every time my husband tries to rope me in on a project (we sometimes do projects together - he does most of the HW and I do most of the SW) he always comes in with the idea that the programming won't be difficult for the same reasons you mentioned. I guess what is "difficult" is all in your perspective!

mrdon
User Rank
Gold
Re: Possibilities are Mind Boggling
mrdon   5/23/2013 12:24:34 PM
NO RATINGS
Nancy,

Very good point. Software can be tricky and I never take it for granted that its easy to use.If you do run into a challenge with a 3D printer project, I believe the support from the Maker Community and Makerbot will alleviate some of the stress.

Its nice you and your husband work on tech projects together. The DIY electronics tech books I've written and are writing today my wife provides editing and tech support on assembly of the electronic projects. Here's my latest book for building cool electronic gadgets using the Arduino.

http://www.amazon.com/Learn-Electronics-Arduino-Technology-Action/dp/1430242663/ref=sr_1_1?ie=UTF8&qid=1369326164&sr=8-1&keywords=learn+electronics+with+arduino

Nancy Golden
User Rank
Platinum
Re: Possibilities are Mind Boggling
Nancy Golden   5/23/2013 1:01:35 PM
NO RATINGS
Very cool mrdon - I just put your book on "the list" for our family to get in the near future. Isn't it great to work with your spouse on projects?! When things aren't working I always blame the HW and Phil always blames the SW LOL. Off topic for this forum but relates to our discussion since we are both authors -  I am literally just putting the finishing touches on this website for a book I have written: www.love2christ.com I couldn't have done it without the support of my husband. Best wishes on your book sales and future projects!

Greg M. Jung
User Rank
Platinum
Re: Possibilities are Mind Boggling
Greg M. Jung   5/23/2013 1:03:50 PM
NO RATINGS
Hi Nancy,

Yes, in many product development arenas, using 3D printing to make quick prototypes is quite common.  This is especially effective on concurrent engineering teams where quick feedback and multiple design iterations can be used to rapidly get to market.

Nancy Golden
User Rank
Platinum
Re: Possibilities are Mind Boggling
Nancy Golden   5/23/2013 1:14:48 PM
NO RATINGS
Thanks for your observation, Greg. The company I worked for typically lagged 3-7 years behind current technology so we did a lot of making do with what we had. I can see that if we could prove the cost-effectiveness of 3D printing and the increased speed to market that we possibly could have sold the idea of investing in one to management - especially since we had a full department dedicated to CAD.

Greg M. Jung
User Rank
Platinum
Re: Possibilities are Mind Boggling
Greg M. Jung   5/23/2013 5:23:36 PM
NO RATINGS
Many companies now, including mine, have a 3D printer on site.  An engineer or a designer will typically send their designs to the machine in the morning and have the parts in the afternoon (or maybe the next day if it is a large/complicated part).  This really accelerates development and test cycles from weeks to even days or hours and is a very effective development tool.

The price of 3D printers has been lowered dramatically, so these systems can be within financial reach now.  When selecting a 3D printer, it is also important to choose one that has simple operation (so that everyone in the department can run the machine, rather than having a specialized technician only).

Nancy Golden
User Rank
Platinum
Re: Possibilities are Mind Boggling
Nancy Golden   5/23/2013 5:35:23 PM
NO RATINGS
Now I really want one - I'm going to start looking into them. But since I only do the occasional project now as a contractor, it really isn't practical for me - I sure wish I had one back in the day!

Ann R. Thryft
User Rank
Blogger
3D printed skulls
Ann R. Thryft   5/24/2013 12:01:18 PM
NO RATINGS
I'd heard of 3D printed partial skull plates, but none this large. Thanks for covering this, Cabe. Here's an entire, artistic 3D printed skull :
http://www.ahalife.com/product/1946/3d-printed-filigree-skull/



Page 1/2  >  >>


Partner Zone
Latest Analysis
Conventional wisdom holds that MIT, Cal Tech, and Stanford are three of the country’s best undergraduate engineering schools. Unfortunately, when conventional wisdom visits the topic of best engineering schools, it too often leaves out some of the most distinguished programs that don’t happen to offer PhD-level degrees.
Sherlock Ohms highlights stories told by engineers who have used their deductive reasoning and technical prowess to troubleshoot and solve the most perplexing engineering mysteries.
Airbus Defence and Space has 3D printed titanium brackets for communications satellites. The redesigned, one-piece 3D-printed brackets have better thermal resistance than conventionally manufactured parts, can be produced faster, cost 20% less, and save about 1 kg of weight per satellite.
A group of researchers at the Seoul National University have discovered a way to take material from cigarette butts and turn it into a carbon-based material that’s ideal for storing energy and creating a powerful supercapacitor.
Hacking has a long history in the movies, beginning with Tron and War Games and continuing through The Girl with the Dragon Tattoo.
More:Blogs|News
Design News Webinar Series
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
7/17/2014 11:00 a.m. California / 2:00 p.m. New York
9/25/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Sep 22 - 26, MCU Software Development – A Step-by-Step Guide (Using a Real Eval Board)
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: September 30 - October 2
Sponsored by Altera
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service