This technology would be great for nature documentary directors, who must stand 200 yards away from dangerous animals while they record. The low signal-to-noise would enable them to pick up sounds from a distance without a lot of distortion.
This is a project that is very interesting, even moreso the version using the satellite TV reflector. So where is the information, I would like to build one of them. I did not get the name or model number of the microphone, but it sounds like an Analog Devices type thing. Where is the project build information, please?
William K, It looks like the Build Instructions have retired from the article. If you wish to send me an email at firstname.lastname@example.org I will reply with the parts list and build instruction, assuming the editor has no objection.
You are correct that the devices are Analog Devices. The mic is an ADMP504, the difference preamp is an AD8273, and the output amp is an AD8397 configured as a difference amp to handle the balanced line from the preamp stage. The quality of sound is excellent and would probably serve in a recording studio with proper mounting.
Maybe I'll see you in another Digi-Key Design News webinar next week.
William K, I discovered that you can get to the build instructions by clicking on the link above the one you probably selected. Go to the most recent Gadget Freak column and look at the links to other Gadget Freak blogs in the right column. Click on #240 and you should get the link that has build instructions.
78RPM, thanks for the clues. I have often been frustrated in my attempts to get infomation about the gadget freak projects. The useful details have always appeared to be withheld, so usually I just abandin the effort to get any details.
The company says it anticipates high-definition video for home security and other uses will be the next mature technology integrated into the IoT domain, hence the introduction of its MatrixCam devkit.
Siemens and Georgia Institute of Technology are partnering to address limitations in the current additive manufacturing design-to-production chain in an applied research project as part of the federally backed America Makes program.
Most of the new 3D printers and 3D printing technologies in this crop are breaking some boundaries, whether it's build volume-per-dollar ratios, multimaterials printing techniques, or new materials types.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.