HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
REGISTER   |   LOGIN   |   HELP
<<  <  Page 2/2
78RPM
User Rank
Platinum
Re: Great Project
78RPM   5/10/2013 12:19:53 PM
NO RATINGS
Thanks, Jim S. If you build this amp I think you will be delighted with the sound quality.  The sound quality of my video was compromised by the cheap voice recorder I was using.  But through the Bose headphones, the noise level is inaudible and the sound is very clean; not surprising when you read the datasheet specs of the devices.

Since the article was written I have increased the output amp gain to 20 with excellent results. There are several benefits afforded by the balanced line architecture.  Read the MEMS mic datasheet and application notes for tips on making the mic more directional by using an array of them.  You could try mounting them in a conventional stethoscope.  The MEMS mic's architecture will not give the "proximity effect" of other mics. Proximity effect is the boost of low frequencies when you talk close.  This bass boost is used by late night DJs to get that crooning sound.  Let me know if you find other uses. You could even use it for a singer's performing preamp if you shield the mic from saliva and dust.

Jerry Cogswell

Jim S
User Rank
Gold
Great Project
Jim S   5/10/2013 10:00:44 AM
NO RATINGS
I was really impressed with the sound microscope modelling. The dishes are usually found in apartment dumpsters around the end of the month when people move out and don't want it anymore. I will look into the mems device itself, because I can think of some other applications for it. Great article.

Charles Murray
User Rank
Blogger
Re: MEMs Mics up Telescope
Charles Murray   5/9/2013 4:42:22 PM
NO RATINGS
I would think this is also usable in the movie industry. In many cases, it seems that movies are made with microphones on booms that only pick up the sound in the immediate area. That's especially true for nature documentaries, where the camera and sound equipment is often 100-200 yards away from the subject. Very innovative idea.

naperlou
User Rank
Blogger
Re: MEMs Mics up Telescope
naperlou   5/9/2013 12:25:33 PM
NO RATINGS
This is a creative device.  The fact that hobyists can use these technologies in such a useful way is a great thing.  There are a lot of mems devices available now, and with the other components that might make up a useful device the scope for creative development is wide open.

Using soundis a good way to find and identify wildlife as well.  It is about this time of year that all the sounds come out.

78RPM
User Rank
Platinum
Re: MEMs Mics up Telescope
78RPM   5/9/2013 11:39:32 AM
NO RATINGS
Yes, Warren, unused dishes are plentiful. You can even find them in trash dumpsters. Mine was one that was left behind when I switched satellite providers. But I felt I needed to give a supply source for those who want something now. But, yep, why pay for it when you can find it free?

Jerry Cogswell

78RPM
User Rank
Platinum
Re: MEMS Mics Up Telescope
78RPM   5/9/2013 11:35:36 AM
NO RATINGS
That might be something I'll try Debera. I'm not sure how that would work but I'm into experimenting. Any references you can provide? The good news is that you can mount this microphone and amp in anything you want. With some circuit board layout it could be made smaller. I'm thinking of redeploying the circuit for other purposes.

Debera Harward
User Rank
Silver
MEMS Mics Up Telescope
Debera Harward   5/9/2013 9:49:43 AM
NO RATINGS
Great information. The solution is a great one however i have read that one can use  low pass filter as well to make the sound far away closer with little resonance .

warren@fourward.com
User Rank
Platinum
Re: MEMs Mics up Telescope
warren@fourward.com   5/9/2013 9:36:57 AM
NO RATINGS
I think you can avoid buying the dish antenna and ask your neighbor, "Hey, Fred!  Can I have that Dish antenna on your roof that you haven't used in 10 years?"

 

The price and availability is much better...

apresher
User Rank
Blogger
MEMs Mics up Telescope
apresher   5/9/2013 8:19:50 AM
NO RATINGS
Excellent post.  The creativity of this solution is great, and a great example of engineering know-how at work.  Thanks.

<<  <  Page 2/2


Partner Zone
Latest Analysis
Lumus and eyeSight have partnered to create consumer-grade devices that offer all the prime functions of smart glasses without the bulk.
VisLab joins the autonomous car effort with the DEEVA prototype.
NASA and Boeing developed a huge, carbon composite cryogenic fuel tank for deep space missions, and started testing it last month. The 18-ft cryotank will enable heavy-lift launch vehicles to send both humans and robots into deep space.
Focus on Fundamentals -- a new Design News webinar series -- kicks off April 29 with How to Select Drives for Robotics Applications. Don't miss it!
Research and other advancements in the realms of robotics, diagnostic and treatment devices, nanotechnology, and medical implants may one day make humans superior versions of their natural selves.
More:Blogs|News
Design News Webinar Series
3/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
2/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
12/18/2013 Available On Demand
11/20/2013 Available On Demand
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Apr 21 - 25, Creating & Testing Your First RTOS Application Using MQX
SEMESTERS: 1  |  2  |  3  |  4  |  5


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: April 29 - Day 1
Sponsored by maxon precision motors
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service