Temperature change to harvest voltage is a good idea. These folks even have a working prototype. My thought is that there is a great build up of static electricity on an aircraft in flight (witness the static "wicks" on the wing trailing edges that help dissipate it). Wonder if this energy could be harvested as well?
That's quite interesting, notarboca, I didn't think of that. But if the temperature-change method proves successful, I'm sure researchers will look for other ways to harvest energy on airplanes as well. That could be another way they do it.
When I started reading this article, I was expecting the energy source to be vibration. I live near O'Hare Airport in Chicago and my windows often shake when planes approach runway 27. So I was surprised to see that it uses temperature differences, which is certainly a viable source as well, given that the temperature outside at 35,000 feet is about -40F. Maybe they could use both sources and gather even more energy.
Why not cowl to ambient? The temperature difference between ambient air and inside the cowl is huge even in my diminutive aircraft.
The static discharge can be very impressive. After one night flight I was attaching the tow bar to the nose wheel and saw a good 3" spark jump into the tow bar. That's why there are sooooo many warnings about grounding before fueling.
That's why there are sooooo many warnings about grounding before fueling.
Static electric charge developed during the flight is huge. Do ground crews have to worry about a shock hazzard if the aircraft has not had the charge dissipated? How is the static charge buildup is prevented from reaching hazzardous potetial?
I know what you mean, Chuck, that is exactly what I thought when I only read a headline about the work before I actually read about the research itself. I have previously spoken to other researchers about using vibrations of cars passing over a bridge to harvest energy for structural integrity sensors, so I knew vibration was a viable method. I suppose what you're proposing is definitely a future possibility.
The company says it anticipates high-definition video for home security and other uses will be the next mature technology integrated into the IoT domain, hence the introduction of its MatrixCam devkit.
Siemens and Georgia Institute of Technology are partnering to address limitations in the current additive manufacturing design-to-production chain in an applied research project as part of the federally backed America Makes program.
Most of the new 3D printers and 3D printing technologies in this crop are breaking some boundaries, whether it's build volume-per-dollar ratios, multimaterials printing techniques, or new materials types.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.