Light emitting diodes are becomming very popular these days people are using them instead of other lights because they are cost effective .Because leds are connected to the AC Supply it produces ripples at the outer end which results in flickering.Any light source which is connected to AC supply results in flickers.
However flickering can be reduced with different methods one method is to use high frequency switching supplies, which helps to reduce the AC component of the main supply and reduces the flickers but not all flickers are avoidable .Remaining flickers can be removed by attenuating g the AC component at the output
This approach may well shorten the lifetime of the string of LED's. The LED's are brighter because the duty cycle has increased from about .5 too near 1, the average current has increased by a factor of 2 and device (LED) heating has certainly increased. It appears in the video that one of the LED's in the demo string of white LED's has been replaced with a red LED. Was this due to failure of the white LED operating under the more stringent conditions?
The first Tacoma Narrows Bridge was a Washington State suspension bridge that opened in 1940 and spanned the Tacoma Narrows strait of Puget Sound between Tacoma and the Kitsap Peninsula. It opened to traffic on July 1, 1940, and dramatically collapsed into Puget Sound on November 7, just four months after it opened.
Noting that we now live in an era of “confusion and ill-conceived stuff,” Ammunition design studio founder Robert Brunner, speaking at Gigaom Roadmap, said that by adding connectivity to everything and its mother, we aren't necessarily doing ourselves any favors, with many ‘things’ just fine in their unconnected state.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.