Light emitting diodes are becomming very popular these days people are using them instead of other lights because they are cost effective .Because leds are connected to the AC Supply it produces ripples at the outer end which results in flickering.Any light source which is connected to AC supply results in flickers.
However flickering can be reduced with different methods one method is to use high frequency switching supplies, which helps to reduce the AC component of the main supply and reduces the flickers but not all flickers are avoidable .Remaining flickers can be removed by attenuating g the AC component at the output
This approach may well shorten the lifetime of the string of LED's. The LED's are brighter because the duty cycle has increased from about .5 too near 1, the average current has increased by a factor of 2 and device (LED) heating has certainly increased. It appears in the video that one of the LED's in the demo string of white LED's has been replaced with a red LED. Was this due to failure of the white LED operating under the more stringent conditions?
What should be the perception of a product’s real-world performance with regard to the published spec sheet? While it is easy to assume that the product will operate according to spec, what variables should be considered, and is that a designer obligation or a customer responsibility? Or both?
Biomimicry has already found its way into the development of robots and new materials, with researchers studying animals and nature to come up with new innovations. Now thanks to researchers in Boston, biomimicry could even inform the future of electrical networks for next-generation displays.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.