HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
<<  <  Page 5/6  >  >>
Debera Harward
User Rank
Silver
Re: NAUTICAL ROBOTS
Debera Harward   4/27/2013 7:42:54 PM
NO RATINGS
Its an excellent slide show agreed and there will be no doubts in saying that Robotics are becomming more and more common these days and using robotics underwater is a very wise approach because it can be difficult and dangerous for a human to go underwater and explore.

Secondly according to the research most of the planets consist of water and water so using underwater robotics will help to investigate a lot in them as well.

But this is a rule of life that every technology has its pros and cons.One of the advantage is mentioned above only that majority of the planets consist of water and it can be helpful in doing research.Secondly it can be initially tested in pools.However the disadvantage is this that it can leak ,sink because no matter how accurately it has been created  its just an electronic development only.Secondly there are very less means of wireless communication and then because its an electronic device its every part is either a device and some devices stop working in water so it can  malfuunction as well

bobjengr
User Rank
Platinum
NAUTICAL ROBOTS
bobjengr   4/27/2013 12:32:02 PM
NO RATINGS
Excellent slide-show Ann.  I must admit, when I think of robotic systems I think manufacturing.  It's an eye-opener to see other viable applications for these devices. The underwater environment can be extremely hostile and certainly a place for robots. I imagine design criteria being quite different for underwater as opposed to above water.  Seals and water-tight enclosures look to be a must to protect against issues with electronics and data-gathering equipment.   Again, great post. 

William K.
User Rank
Platinum
Nautical robots of all shapes and sizes.
William K.   4/26/2013 6:23:25 PM
NO RATINGS
This is a very interesting and informative slideshow, thanks Ann. There are certainly a variety of them around, for all sorts of applications. 

It the floats on the one intended to explore those hydrocarbon lakes on Titan are really sytrofoam, though, I predict failure, since most hydrocarbon liquids disolve styrofoam, some faster, some more slowly, but most, eventually.

RichardBradleySmith
User Rank
Bronze
Re: Variety of water worthy robots
RichardBradleySmith   4/26/2013 1:41:42 PM
NO RATINGS
This one:

An autonomous robotic vehicle for exploring lakes on other planets has been developed by researchers in the University of Arizona's department of electrical and computer engineering. Something like a nautical version of a planetary rover, the lake lander, also called the Tucson Explorer II (TEX II), could be used to investigate the liquid hydrocarbon lakes on Titan, Saturn's largest moon. Although it will be a while before TEX II goes on a mission to Titan, it can be used on Earth to clean up littoral munitions dumps and mines, as well as harbor surveillance, environmental research, and search and rescue operations in oceans, lakes, and hazardous environments. Controllable via an Internet connection, TEX II has cameras and sonar operational up to 100 m. Its catamaran design provides stability, with two 6-ft long fortified Styrofoam hulls about 5 ft apart. The Styrofoam lets the lake lander withstand hull damage while maintaining buoyancy of its 100-lb weight and 150-lb payload.

Seems like it has to much windage which may not be a problem on other planets but it is "air" driven! They even mention cleaning up mines. I assume that to be old fashion ship exploders! These thing are all swaming mines ready to go get your billion dollar aircraft carrier. NK should forget the nukes and make these. Air dropped in front of the path of a navy fleet, oh my goodness. Boom! What the heck was that? Boom! Boom! Boom! 

Dangela
User Rank
Bronze
cool stuff
Dangela   4/26/2013 8:56:45 AM
NO RATINGS
These are pretty cool and would be really fun to work on. What would be better though is if you clicked on the picture you went to the next slide instead of just refreshing the current one.

Measurementblues
User Rank
Silver
Nautical robot designed by students
Measurementblues   4/26/2013 8:28:30 AM
NO RATINGS
Ann, thanks for this article. As it happens, we have a complementary article today on The Connecting Edge.

Students Design Underwater Robot

It's an undergraduate senior project from students at Worcester Polytechnic Institute.

Rob Spiegel
User Rank
Blogger
Re: Variety of water worthy robots
Rob Spiegel   4/25/2013 7:42:57 PM
NO RATINGS
What an interesting question, Ann. Perhaps in water, the size and shape of the robot is not as important as it would be on shore. That is, unless speed is a factor. In that case, a shape with the least resistance would likely be superior.

Charles Murray
User Rank
Blogger
Anti-submarine warfare
Charles Murray   4/25/2013 7:10:42 PM
NO RATINGS
Nice to know that the anti-submarine warfare vessel is designed to operate entirely without human presence. On the few occasions when I've had a chance to go on board submarines, I've always been amazed how cramped and tiny they are. (They look much bigger in the movies.) BFor a human to be confined to a sub for any length of time appears to be a very tough assignment.

Ann R. Thryft
User Rank
Blogger
Re: Variety of water worthy robots
Ann R. Thryft   4/25/2013 12:42:55 PM
NO RATINGS
Thanks, Rob, I've had the same basic question. The clunky ones have been aorund a lot longer--in fact, last week I saw James Cameron's movie The Abyss (1989) again, and noticed the ROV in it looks just like many in use today, 24 years later. So presumably, the clunky ones are still perfectly serviceable for what they do. OTOH, I suspect the designers of the biomimicry-inspired ROVs and AUVs, and their funders, are interested in finding out whether animal-inspired designs will be more energy-efficient, and/or more cost-effective.

apresher
User Rank
Blogger
Nautical Robots
apresher   4/25/2013 8:49:34 AM
NO RATINGS
Excellent slide show. It's interesting to see the different design concepts used for systems like this.

<<  <  Page 5/6  >  >>


Partner Zone
Latest Analysis
Advertised as the "Most Powerful Tablet Under $100," the Kindle Fire HD 6 was too tempting for the team at iFixit to pass up. Join us to find out if inexpensive means cheap, irreparable, or just down right economical. It's teardown time!
The first photos made with a 3D-printed telescope are here and they're not as fuzzy as you might expect. A team from the University of Sheffield beat NASA to the goal. The photos of the Moon were made with a reflecting telescope that cost the research team 100 to make (about $161 US).
At Medical Design & Manufacturing Midwest, Joe Wascow told Design News how Optimal Design prototyped a machine that captures the wing-beat of a duck.
The increased adoption of wireless technology for mission-critical applications has revved up the global market for dynamic electronic general purpose (GP) test equipment. As the link between cloud networks and devices -- smartphones, tablets, and notebooks -- results in more complex devices under test, the demand for radio frequency test equipment is starting to intensify.
Much of the research on lithium-ion batteries is focused on how to make the batteries charge more quickly and last longer than they currently do, work that would significantly improve the experience of mobile device users, as well EV and hybrid car drivers. Researchers in Singapore have come up with what seems like the best solution so far -- a battery that can recharge itself in mere minutes and has a potential lifespan of 20 years.
More:Blogs|News
Design News Webinar Series
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
9/25/2014 11:00 a.m. California / 2:00 p.m. New York
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 20 - 24, How to Design & Build an Embedded Web Server: An Embedded TCP/IP Tutorial
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: 10/28-10/30 11:00 AM
Sponsored by Stratasys
Next Class: 10/28-10/30 2:00 PM
Sponsored by Gates Corporation
Next Class: 11/11-11/13 2:00 PM
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service