HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
<<  <  Page 5/5
tekochip
User Rank
Platinum
Re: Weight
tekochip   4/19/2013 9:45:41 AM
NO RATINGS
Weight is a major issue. I have an electric mower that I modified so I could run from a battery pack and charge it with solar panels. Yes, a green lawn mower. It cost more than I will ever save in fuel, and the original 17AH SLA cells only last about three years. I repacked the mower with a 10AH NiMh that produces the same run time at about 1/3 the weight, a huge savings.
 
I only have one season in the NiMh pack, so I can't comment on life, but there is one downside. It's very easy to monitor the State Of Charge (SOC) for SLA cells, but impossible with NiMh. Since I charge with solar panels I have no way of knowing how much energy is going into the cells, so I had to add a Coulomb counter to monitor the charge. There are plenty of charge monitors on the market used for model aircraft and the like, but they have quiescent currents in the tens of mA range, not suitable when a cloudy day only yields that much from the panels, so I had to build my own monitor that idles in the uA range. Like I said, I'm never going to recoup the cost from fuel savings, but it's been a good learning experience.
 
So, from what I've learned, SLA is heavy, has a poor service life for a constant draw in the 1/2C range, but is very easy to monitor the SOC. The current NiMh technology is fairly light and handles a 1C draw very well, but you can't monitor the SOC very well.


AnandY
User Rank
Gold
Re: Weight
AnandY   4/19/2013 2:17:08 AM
NO RATINGS
Lead-acid batteries have lowest energy-to-weight and energy-to-volume designs, making them very big and heavy for the total amount of power that they can put out. But they do have a very high surge-to-weight ratio, which means that they have the capacity to deliver a big jolt of electricity all at once. This feature makes lead-acid battries perfect for applications that need a big, sudden surge of power, such as car starters.

TJ McDermott
User Rank
Blogger
Weight
TJ McDermott   4/18/2013 4:02:13 PM
NO RATINGS
Weight wasn't mentioned at all.  That characteristic weighs against lead/acid (forgive the pun), especially for smaller vehicles.

Rob Spiegel
User Rank
Blogger
Re: Lithium ion on the way out?
Rob Spiegel   4/18/2013 11:09:22 AM
NO RATINGS
Alternatives to the internal combustion engine. A dressed up older battery technology may help break through the difficulties. Or perhaps something else. So far it looks like lithium-ion will see some challenges.

tekochip
User Rank
Platinum
New Improvements
tekochip   4/18/2013 9:39:54 AM
NO RATINGS
If they could do something to improve the old technology that would be fantastic. Lead-acid is forgiving and easily remanufactured, but it's also heavy and has a poor life-cycle under constant use. It's great for starting cars, though.


Elizabeth M
User Rank
Blogger
Lithium ion on the way out?
Elizabeth M   4/18/2013 9:33:51 AM
NO RATINGS
Interesting story, Chuck. I think it's a bit early to count out lithium ion, especially with some new research in different chemistries. But with all the negative publicity and the current limitations of the technology, there is certainly room for another battery chemistry to take its place.

<<  <  Page 5/5


Partner Zone
Latest Analysis
A Frost & Sullivan study finds that increased cyber attacks are prompting a flurry of innovative protection tools.
Devices and interconnected systems are finding a foothold not only in our homes but in mainstream organizations. Here are three tips to mitigate the risk.
What makes this movie stand out from the typical high school sports story is that the teenagers are undocumented immigrants, and the big game is a NASA-sponsored marine robotics competition. Like many other Hollywood movies, however, Spare Parts only tells part of the story. What the film shows -- and doesn’t show -- raises important issues affecting STEM education in the US.
Instead of sifting through huge amounts of technical data looking for answers to assembly problems, engineers can now benefit from 3M's new initiative -- 3M Assembly Solutions. The company has organized its wealth of adhesive and tape solutions into six typical application areas, making it easier to find the best products to solve their real-world assembly and bonding problems.
Load dump occurs when a discharged battery is disconnected while the alternator is generating current and other loads remain on the alternator circuit. If left alone, the electrical spikes and transients will be transmitted along the power line, leading to malfunctions in individual electronics/sensors or permanent damage to the vehicle’s electronic system. Bottom line: An uncontrolled load dump threatens the overall safety and reliability of the vehicle.
More:Blogs|News
Design News Webinar Series
2/25/2015 11:00 a.m. California / 2:00 p.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
12/10/2014 8:00 a.m. California / 11:00 a.m. New York
3/31/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Mar 30 - Apr3, Getting Hands-On with Cypress’ PSoC
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  67


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service