You're probably right, Battar, but I like to have a more optimistic view and hope that by making these type of cars before there is demand for them, somehow the demand eventually will be created. I hope these cars will be so good that those people who still have 200k+ gas guzzling cars will eventually give them up and go EV or hybrid.
You have a good point j-allen. The main problem with gas engines is that they drain a lot of fuel in the city limits when the traffic is at its peak. Electric cars can help in this regard with their limited performance capabilities since nobody will be needing a superfast electric car when they're stuck in traffic and moving at a snail's pace.
Charles, a series-wound DC brush type motor would be a very good motor for a dragster because the torque is greatest at zero speed. The challenge there is that the current draw is greatest also. The other challenge is the range of speeds available with a given motor design. The big problem is that as the speed increases the back EMF also rises, which reduces the current, and thus the power. So to keep accellerating the supply voltage needs to keep increasing. Thus the need for gear shifting, unless the car finishes the quatrter mile befor the motor torque starts to fall off.
The motor type is described as "AC Synchronous", which is a type of motor that has a definite best operation spread of speeds. The DC series type of motor is quite different in it's speed-torque curve. So for most efficient operation different gear ratios will be quite beneficial. Study the curves and you will understand why that is.
Not sure I understand the need for a gearbox in an electric car, unless you need to "feel" like a combustion engine car... Or is it because they are using very small motors that could not sustain both high accelerations and top speeds ?
Robots that walk have come a long way from simple barebones walking machines or pairs of legs without an upper body and head. Much of the research these days focuses on making more humanoid robots. But they are not all created equal.
The IEEE Computer Society has named the top 10 trends for 2014. You can expect the convergence of cloud computing and mobile devices, advances in health care data and devices, as well as privacy issues in social media to make the headlines. And 3D printing came out of nowhere to make a big splash.
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This discussion will examine what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.