Cadman-LT, are the machines you are talking about CNC or manual. Frankly, if you are making any volume of a part, then more traditional machining will beat out 3D printing any day. While the up front cost of a mold or tool may be high, amortized over many thousands of parts the cost is cheap. If you are prototyping or doing very small production runs of complex parts, 3D printing should be the way to go. In addition, 3D printing can be tied to many CAD systems making prototyping and visualization very cost effective. You should probably get some of both.
Good points, TJ. I would imagine there will be a number of hurdles in getting 3D houses into production. For one, I can't imagine a house built from 3D parts would be cost effective. That may change, though, as the cost of 3D prnting comes down.
Well, this is an impressive project, to say the least. Although I personally think that's quite a lot of money to spend on something that's just to prove that something can be done. But I guess you have to start somewhere! I think it will be a long time before actual buildings that are up to code will be 3D printed, though!
While this may sound cool, 3D printing is VERY slow. It is very good for low volume, complex and one off shapes. Take, for example, concrete forms. To do it the traditional way, you have to make a form, then you pour the concrete and you have your part. The longest part of the process is making the form. If you only have one to do, then maybe you 3D print instead. On the other hand, at 5mm intervals it will take a VERY LONG TIME. It would probably be better to make forms with 3D printing and then just pour the concrete. It would certainly be faster.
No matter how you do it, it would be equivalent in terms of being environmentally friendly. That is not a consequence of 3D printing. Perhaps he should look at the energy used in the printing as oppossed to various ways of making the forms. That 3D printer will be using lots of energy at the 5mm thickness planned. This is a calculation that is often overlooked.
The company says it anticipates high-definition video for home security and other uses will be the next mature technology integrated into the IoT domain, hence the introduction of its MatrixCam devkit.
Siemens and Georgia Institute of Technology are partnering to address limitations in the current additive manufacturing design-to-production chain in an applied research project as part of the federally backed America Makes program.
Most of the new 3D printers and 3D printing technologies in this crop are breaking some boundaries, whether it's build volume-per-dollar ratios, multimaterials printing techniques, or new materials types.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.